Trico Masonry Products LLC
EZClip provides the ability to have a flush embed plate installation, and is designed to allow for maximum grout consolidation, wall strength and contact between the bolt and plate surface to the grout in the wall cavity. The clips are self-adjusting and aligning to fit the thickness and size of most block walls and plates. Because embed plates are installed as work progresses, no follow-up work is required and blowouts are eliminated. The front of the clip can be easily removed after grouting. The clips install in seconds, reducing labor costs, and are extremely strong. EZClips are compact, lightweight and conveniently kept in supply bags and at workstations. For more information, call (888) 922-8377, or visit www.tricomasonryproducts.com.
TruStone AAC is an ultra-light masonry product with a number of exceptional physical characteristics. TruStone shortens construction cycles, saving time and money. It has one of the highest hourly fire resistance ratings per inch of any building material. It has better thermal efficiency than a stud wall with six feet of R-19 insulation. TruStone's exceptional sound insulation properties exceed all other building materials of the same weight per surface area. It is 100-percent resistant to termites and insect pests, and will not sustain mold growth. Completely environmentally friendly and "green." For more information, call toll-free (877) 351-4448, or visit www.trustoneamerica.com.
Las Vegas, Nevada
At Xtreme Manufacturing, the XRM1045 (10,000 lb capacity, 45-foot max reach) is our largest capacity model without outriggers, and has many features and benefits that are standard on all Xtreme telescopic reach forklifts. These features include: Perkins turbo-charged diesel engine, 360-degree visibility, robust chassis, foam-filled tires, deluxe suspension seat, improved hydraulics, roller boom, adjustable operator controls, quick attach, full-time planetary four-wheel drive and service accessibility. Each unit comes standard with a groundbreaking 10-5-3-2 Warranty. For more product information, call (800) 497-1704, or visit www.xtrememanufacturing.com.
Alimak Hek, a leading manufacturer of mast climbing work platforms, announces the HEK MS ProMax. Designed and developed to meet customer demands for higher payload, faster travel speeds at 36 feet per minute, and longer platforms at up to 50 feet for a single, the MS ProMax has proven to be a safe and reliable means of fašade access both in freestanding and anchored configurations.
When used in conjunction with the Megadeck central deck section, maximum platform length is 126 feet, and the HEK MS ProMax can be used for heights up to 660 feet. For more information, call (203) 330-5682, e-mail email@example.com, or visit www.alimakhek.us.
West Springfield, Mass.
Offering a power-to-weight ratio higher than competing pneumatic and electric systems, Atlas Copco hydraulic power packs efficiently power a wide assortment of hydraulic handheld tools for construction, utility and demolition projects. Several power pack models are offered to accommodate the varying oil flow and pressure requirements of the tools they power. In addition, a twin pack model has the capability to supply power to two tools at the same time. Equipped with foldable handles and large wheels for easy maneuverability, the power packs allow for connecting hydraulic tools to be used virtually anywhere. For more information, visit atlascopco.com.
Bacou-Dalloz Hearing Safety Group
The Bacou-Dalloz Hearing Safety Group has extended its popular line of Bilsom® Leightning® earmuffs with a new L-Zero (L0) Series. Designed to provide reliable protection from intermittent or marginal noise hazards, the L0 Series features an ultra-slim earcup design with less weight and bulk than standard earmuffs, and is available in folding (noise rated protection of NRR 23) and neckband (noise rated protection of NRR 22) models. Like other products in the Bilsom Leightning line, L0 Series earmuffs incorporate a new, patented Air Flow ControlTM technology that provides improved low frequency attenuation and more consistent attenuation across all frequencies. For more information, visit www.hearingportal.com.
Bon Tool Co.
Bon Tool Co. has expanded its line of stainless steel tools with its new, patent-pending stainless steel barrel jointer. This masonry jointer is more durable than a carbon steel jointer. And unlike carbon, the modified stainless steel formula of the barrel is corrosion resistant with less risk of rusty spots on finished mortar joints. Bon Tool's stainless steel barrel jointer comes with four replaceable barrels ranging from 1/2-inch to 7/8-inch. Bon Tool continues to grow its line of stainless steel tools, which now includes more than 50 masonry trowels and three masonry jointers. For more information, call (724) 443-7080, or visit www.bontool.com.
Danish Import, Inc.
For 50 years, Danish Import has marketed masonry drill bits and light-duty plastic anchors through distributors. Product offerings have been expanded to include high-speed jobber bits, wood spade and ship auger bits, plastic anchors and kits, screwdriver bit tips and nutsetters, cable ties, hacksaw blades, jig saw blades, reciprocating blades, hole saws and band saw material. To order a new catalog, call (800) 251-5241, or visit www.rockhardtool.com.