Imperial Systems, Inc., Diverter Valves PDF Print

Imperial Systems, Inc. Diverter Valves

This heavy-duty diverter valve is an effective method for directing flow from a single source to multiple destinations. Diverter Valves are used in a variety of applications: recycling, seed, grain, woodworking, steel, mining, aggregate, biofuels, food processing, pet food, ethanol, agricultural, chemical processing, paper scrap and fiberglass.

Standard features include 10 ga construction, three types of seals (rubber on metal, urethane on metal and metal on metal), locking quadrant, heavy-duty flange bearings, bolt on completely removable top and side access doors, totally smooth interior with no rough edges. Available in manual, electric or pneumatically operated, stainless steel construction, AR body and blade.

For more information, please visit, or speak with an experienced sales person at 800-918-3013.

Last Updated on Thursday, 30 July 2009 13:27
Cold Weather Mortar and Grout Mixing Solution PDF Print

Mason contractors are very aware of the added expense and the never ending battle of working in cold temperatures while constructing masonry projects. Throughout the history of masonry construction, one of the single largest costs and inefficiencies of working in the winter or any cold weather condition is generating a steady supply of warm water for mixing mortar and grout. The reality is that heating sand and water by way of propane gas and culvert pipe or direct flame on a barrel is a waste of money and time, not to mention it introduces safety concerns. Considering all of the recent innovations impacting masonry products, practices and equipment, there is definitely a need for a system that eliminates this job site challenge, especially a solution that increases the efficiency and productivity of a mason crew.

4U Manufacturing, a Wyoming based company, researched this cold weather predicament and developed the solution— “The Water Hopper”. The Water Hopper is a portable automatic water system that will place a pre-determined or variable amount of water into one or more mixers simultaneously. Operating with an innovative and energy efficient technology, the Water Hopper is a labor-saving device that will heat and dispense water on the jobsite. The unit ensures that the preferred amount of water at the optimal temperature to meet code requirements is introduced for every batch.

Depending on the contractor’s needs and job site space, the unit is available in the larger capacity “Extreme Water Hopper” and the smaller “Job Box Model”. The Extreme model is an 8ft. x 10 ft. standalone insulated unit that optimizes fuel efficiency, provides protection from the elements, and is easily transported on site or from job to job. It has two metered storage tanks and can dispense from both sides of the shell, working simultaneously to fill two mixing stations, one on each side. Also available is a scaled down version called the Job Box Model which is a smaller, more portable unit that is placed next to the mixer. With the flip of a switch, the Job Box produces hot water instantly.

Regardless of whether a contractor uses a silo system or small bags, mixing onsite has never been as consistent and efficient as it is with the Extreme Water Hopper. The unit ensures that the preferred amount of water at the optimal temperature to meet code requirements is introduced to every batch. The unit runs off of AC or DC power while using either propane or natural gas to generate heat and ultimately supplies mixing water with temperatures ranging from 98°F to 140°F. This allows the laborers to safely control the water heating process and results in the desired temperature of mortar and grout as stated in Building Code Requirements for Masonry Structures (ACI 530/ASCE 5/TMS 402). With the simple pull of a lever, a predetermined amount of heated water is dispensed directly into the mixer.

With an output rate of up to 40 gallons every five minutes, the Extreme Water Hopper can provide all the hot water needed from a small project to a very large project. Mason contractors revel at its ability to instantly charge a 20 cubic foot mixer with enough heated water for a full batch. Furthermore, while one batch of mortar or grout is mixing, warm water is automatically replenishing the Water Hopper’s metered tank providing continuous material batch cycle times that can be set between three to six minutes. When utilizing the Water Hopper, batches of mortar and grout will always be the temperature desired by the contractor. That said, job site inspectors can relax knowing the temperature of the product going into the wall is always within tolerance for optimal performance.

As a problem solver with an extensive background in masonry equipment, the originator of the Water Hopper, Mike Capps of 4U Manufacturing engineered the system while focusing on contractor benefits. To find the best solution Capps spent over three years in research and development, talking with numerous mason contractors and visiting job sites to witness the different approaches used by mason tenders to heat water. What he identified were significant inefficiencies which hindered production and increased costs. From the start it was clear the Water Hopper system was needed to help contractors reduce those costs and increase production.

In cold weather climates mason tenders or laborers are typically required to be on site early, sometimes up to an hour ahead of the crew to heat the water and prepare the first batch of mortar for the masons. The Extreme Water Hopper enables the mason tender to charge the first batch of mortar in the morning within five minutes of punching in and is ready to dispense heated water into the mixer for the second batch before the first mortar tub is loaded.  The tender then needs only the last five minutes of the day to prepare for the following day. This equals a minimum labor savings of 30 minutes every day or roughly 10 hours every standard work week.

Another savings the Water Hopper provides mason contractors with is lower fuel cost for heating water. During his field research Capps observed a project where the laborer had two handheld torches blowing flames directly on three 55 gallon water barrels to keep the water hot. It was estimated that the contractor was using nearly 100 pounds of propane gas every day. In comparison, the same amount of propane would last approximately two weeks to heat that same amount of water using the Extreme Water Hopper. The LP Gas or Natural Gas is only used when the demand for hot water is activated by the float; this eliminates wasted energy. When a contractor uses traditional torches and water barrels to heat water, it’s not uncommon for 80% of the fuel to be wasted, not so with the Water Hopper. Additionally, there’s a cost to chase down and replace the tanks daily, not to mention the wasted labor while waiting for the water to be hot enough to meet code.  Capps adds, “The Water Hopper requires very little maintenance and fuel compared to traditional heating methods and when contractors couple this savings with the profitability realized from increased daily production of their laborers and masons, the net gain can easily double if not triple”.

With increased safety requirements prohibiting open flames in many work areas, contractors utilizing the Water Hopper are benefiting because of the unique design with no exposed flame nor electrical elements in the water. The Water Hopper provides a quick, safe, energy efficient, professional tool for any mason contractor and gets two thumbs up from inspectors, general contractors, safety personnel, and project management.

The Water Hopper is patent pending and proudly manufactured in the USA by 4U Manufacturing LLC. It is available in the Extreme model or The Job Box model. With either option, The Water Hopper is an energy efficient, production boosting, labor savings piece of equipment, designed to maximize contractor profits and keep the jobsite safe.

For more information call 888-754-7909 or see our website at
Last Updated on Monday, 20 September 2010 18:33
Mahogany I-Beam Levels PDF Print

Sands Level & Tool Co.® now offers Professional Top Reading Mahogany I-Beam Levels. These levels are made from the finest selection of mahogany wood with a heavy-duty, aluminum I-beam frame. Large, clear vials for easy visibility and an adjustable top vial for accuracy. These levels also have shock absorbent end caps and protective glass lenses for durability. They are available in 24 and 48 inches. For more information, visit, or call 800-422-2448.



Last Updated on Friday, 17 July 2009 16:55
Featured Product: Wire Brush and Scraper Combo PDF Print

Scraping paint and pulling up flooring is tough work, and these dual-action scraper/brushes from Hyde will save time and effort.

Last Updated on Tuesday, 30 June 2009 18:51
Featured Product: Choctaw Tumbled Natural Stone PDF Print

Rock-It Natural Stone has introduced Choctaw Tumbled, a natural, tumbled building stone that is available in all-natural thin veneer, pavers, wall cap material and full-dimensional building stone.

Last Updated on Tuesday, 30 June 2009 18:53
Featured Product: RocKit Grout Gun PDF Print

Zero5 Innovations’ RocKit Grout Gun incorporates a semi-rigid tip, so grout is applied to joints similar to conventional caulking methods in that you smooth the grout joint as it is applied.

Last Updated on Tuesday, 30 June 2009 18:54
Featured Product: Heavy-duty Block Saw PDF Print

Concut Inc.’s CB-Block Saw is a 24-inch block saw featuring a heavy-duty, three-inch structural steel frame, a fixed cutting head and extremely precise and durable roller table.

Last Updated on Thursday, 16 July 2009 22:45
Featured Product: CR1600 Cable Reel PDF Print

The Hannay Reels CR1600 cable reel offers live connection of power cable for direct wiring to a collector ring assembly, allowing for continuous current during cable payout and rewind.

Last Updated on Tuesday, 30 June 2009 18:49
Featured Product: Pre-Fabricated Energy Efficient Panels PDF Print

Pittsburgh Corning has expanded its LightWise Architectural Systems to include Energy Efficient Glass Block Panels...

Last Updated on Monday, 01 June 2009 03:48
Featured Product: Hi-Viz Orange TechnaCurv Harness PDF Print

The Custom TechnaCurv Harness has a patented curvilinear comfort system that combines curved neck and torso webbing with an adjustable Y Back D-Locator pad.

Last Updated on Monday, 01 June 2009 03:47
Featured Product: Cut N’ Strut PDF Print

MK Diamond Products’ Cut N’ Strut provides customers with the ability to upload as many as 10 images of their various projects directly to the MK Diamond Web site...

Last Updated on Monday, 01 June 2009 03:46
Featured Product: Slimline LED Light Head PDF Print

ECCO’s 3510 surface mount LED warning light is designed to offer maximum performance with minimum size.

Last Updated on Monday, 01 June 2009 03:44
<< Start < Prev 21 22 23 24 25 26 27 28 29 30 Next > End >>

Page 28 of 31