Masonry Magazine April 1961 Page. 7
The Structural Clay Products Research Foundation
The Structural Clay Products Research Foundation has worked closely with the MCAA and BM&PIU in developing the practical field application of this new concept of clay masonry construction. In addition to a number of structural clay products manufacturers, several mason contractors have expressed their interest and intent to apply for a license to fabricate the "SCR building panel".
The layer then loads the large "plate girder" panel assemblies for delivery to job. Despite size, weight and relative thinness, panels are handled easily.
25 MASONS three floors up easily supplied by LAD-E-VATOR Automatic Hoist!
One easily swings each large plate into place on building frame where erection crew of six (three at top, three at bottom) quickly plumbs, levels and welds panel to steel frame.
Asch Building nears completion, Folded plate (saw tooth) areas at extreme right and left are those in which "SCR building panel" girders were used. Metal-to-metal joints between large panels are caulked later with special plastic caulking compound.
1962 Convention and Educational Trade Show of the Mason Contractors Association of America will be held at the Shamrock Hotel, Houston, Texas, February 11 thru 14.
A positive answer to the problem of rising costs and a larger PROFIT for you.
The Led-E-Voter is built of tempered aluminum, giving an overall weight only one-third that of steel. Because of this light weight the Lad-E-Vator transports and sets-up easily. The tower telescopes to 16, 20 or 25 ft. lengths for towing behind car or truck. Unloading height for materials up to 42 ft. Load capacity is 1250 lbs. Lad-E-Vator is also available with a curved top for using as a skip, or with dumping scoop for hoisting loose materials.
Write us today for the distributor nearest you.
CAMPBELL Equipment Company P. O. Box 306, Des Plaines, Illinois
SONRY APRIL, 1961 7