Masonry Magazine September 1970 Page. 5
Only Keystone makes
reinforcement for floors.
And walls. And roofs.
And that's not ouronlyonly...
Our one-piece reinforcement won't tie you up in knots. Gives you stronger floors, faster.
Keyweld structural fabric-it's factory-made to your exact needs. With steel sizes and spacings right on the money, and welded for keeps.
So you place whole sections-up to 16 x 36 feet of reinforcement in one pass. No measuring. And no hand tying whatsoever.
Result: You're set to pour floors in about one-fourth the time it would take using standard rebars.
What's more, Keyweld sheets are color coded. So you save days of on-site inspection and supervision time.
Summed up: Here's a great way to beat today's profit-squeezing premium on time and labor. With Keyweld reinforcement-yours from Keystone.
You mix. We match. Assuring you the right reinforcement for better, stronger walls.
More steel if mortar can take advantage of it, more bonding area if mortar needs it-that's the simple secret behind mortar-matched Keywall reinforcements.
For the ultimate in strong, crack-resistant walls, the terrific bonding power of high strength mortar makes full use of the extra steel in Keywall Truss-Type reinforcement-proved by lateral pressure tests at the University of Toledo.
But conventional mortars need the extra bonding surface of Keywall Multibond reinforcement -96% more than 9 gauge truss, 55% more than 3/16" truss, plus mortar locks (28 per 8" block), plus mechanical anchors. Multibond rolls are extra-easy to handle on the job, too. And you need only a tin-snips to cut exact lengths.
So match your mix for stronger masonry, with Keywall reinforcement. Only from Keystone.
City-County Building, Indianapolis. Ind.. serving both that city and Marion County. By Allied Architects & Engineering of Indianapolis, Inc.-a consortium created especially for this project. Keystone products: Keywall masonry reinforcement and Keyweld reinforcing fabric.
Our subpurlins are full of holes to make your roof deck lighter, stronger.
Because lightweight, cast-in-place material flows through the open webs in Keydeck Truss-T subpurlins, uses its bonding capacity to the fullest, makes subpurlins a truly integral part of your roof deck. With tremendous resistance to shear, uplift, cracking, and deflection. What's more, a two-hour fire rating can be yours with less material investment when Keydeck Truss-T's team up with Keydeck Multibond (wire mesh) reinforcement to UL specifications.
So look for the holes when you're after lighter, stronger, fire-rated roofs. It's the single, simple design advance you get only with Keydeck Truss-T subpurlins.
KEYSTONE STEEL & WIRE
DIVISION OF KEYSTONE CONSOLIDATED INDUSTRIES, INC., PEORIA, ILLINOIS 61607