Masonry Magazine February 1980 Page. 48
You know the risk of not getting a masonry job clean enough to sell. It can tie-up your money - so why take a chance? If you have a lot of brick to clean, the mortar is hard and you are starting to worry about it, please call us. A Factory Representative will demonstrate on your job site and quote a price that you can afford.
Mason Contractors, Architects and Government Agencies have accepted this method of cleaning. A demonstration will show you how expensive and secret chemical formulas are not necessary. Plain, cheap Muriatic Acid can be used for most cleaning jobs, using hot water to activate the acid and extend the cleaning season in winter months. However, if special chemicals are specified, this machine can use them.
We sell direct from the Factory thru Factory Representatives who are expert in the mechanics of this machine and methods of cleaning. We train your operator, on the job site, to operate and maintain the machine. The design is simple and sturdy as possible for easy maintenance by the owner. A comprehensive Maintenance Manual is provided. Any machine brought into the Factory will be serviced upon request.
For service information and parts, call our Toll-Free 800 WATS #. We are only seconds away by phone. Parts are shipped by UPS the same day requested and are only hours away by air. Our parts inventory is large and complete.
Manufacturer warrants each machine to be free from defects in material, component parts, and workmanship for a period of 90 days.
Features of our Machine conform with these objectives:
1. A quality production machine. Every component part is rated for 2150 psi or above.
2. A machine powerful enough to handle the largest and toughest cleaning job; one that will set on the ground and clean a building 20 stories high.
3. A machine compact and portable enough to perform a small cleaning job.
4. A machine that can handle other cleaning jobs not related to masonry walls.
5. A machine designed for safety to protect both the Operator and the Machine.
6. Combine all of these objectives into one model, the K-2150, with one price to all customers.
SPECIFICATIONS:
Model K-2150
Type Chemical Induction Cleaner
Water Volume 3 GPM
Output Pressure 2150 PSI
Fuel Engine Regular Gasoline
Burner Kerosene or No. 1 Fuel Oil
Liquids Gasoline 1.9 Gal.
Capacity Kerosene 12 Gal.
Acid 20 Gal.
Water 7 Gal.
Hoses Acid 14" acid and heat resistant hose
Water 36" wire braid 3000 psi at 250°- Length 100 Ft.
Boiler Insulated Heavy-duty butt-weld 1½" pipe
Pressure and thermal protected
Dry Machine 900 lb.
Weight Trailer 290 lb.
Dimensions Machine 62" Long x 40" Wide x 27" High
Machine & Trailer 102" Long x 58" Wide x 47 High
Engine 10.5 HP Wisconsin Robin - Model EY44W-Counter-balanced
Air Compressor 14 HP-Model 21 - Smith
Pump Triplex Plunger Pump - Giant - Model PB-41
Burner Nu-Way-Model FR-2 GPH
Trailer Spring Axel - Over the road high speed design