Masonry Magazine December 2008 Page. 17

Masonry Magazine December 2008 Page. 17

Masonry Magazine December 2008 Page. 17
Aqua Flash 500
A composite sheet type waterproofing membrane consisting of 8 mils of high density cross laminated polyethylene bonded to 32 mils of rubberized asphalt for a total thickness of 40 mils. Available in 12", 16", 18", 24" and 36" widths. Standard length is 50 linear feet.

1-800-849-6722
www.WIREBOND.com

WIRE-BOND®'s Sure-Tie
Gets Right To The Point!
Sure-Tie quickly and accurately pierces insulation and/or wallboard to abut with steel studs in brick veneer applications.
* One-piece design provides superior strength.
* Sure-Tie has a #12-24 tapping thread 1" in length.
* Accommodates 1/2" and 5/8" wallboard and various thicknesses of 4' by 8' insulation sheets.
* Climaseal coating provides superior corrosion resistance.

Corelock
(patent pending)
New rebar positioner is "seated 1-1/4" deep into core of CMU. Diagonal placement in block insures rebar is automatically centered every time. Prevents any possible movement of positioner during block installation. Simple, one-piece, no-weld design. Does not interfere with installation of wire masonry joint reinforcement.

1-800-849-6722
www.WIREBOND.com

Level Eye (U.S. Pat.#6,735,915)
(U.S. Pat.#7,152,38282)
WIRE-BOND's Level eye features a single plane design to eliminate thick welds and allow heavier gauge on the side wire. The Level eye design provides the least profile possible with superior strength and durability. The entire assembly is 3/16" in height and provides optimum CMU core clearance. The dual tangent points of the eyelets and tabs achieve a deep weld in the side wire of the reinforcement which exceeds strength requirements of ASTM951!

1-800-849-6722
www.WIREBOND.com

Type III-X Anchor
WIRE-BOND'S Type III-X Anchor installs quickly and easily on exterior walls with brick veneer while providing positive contact with metal studs. It transfers compression loads to the steel stud backup. The Type III-X is available in 14 gauge and 12 gauge (plate). Finishes include mill galvanized, hot dip galvanized, and stainless steel. Prongs on the anchors are available in lengths to accommodate 1", 1-1/2, 2", and 2-1/2" insulation, as well as 1/2" and 5/8" wallboard.

1-800-849-6722
www.WIREBOND.com


Masonry Magazine December 2012 Page. 45
December 2012

WORLD OF CONCRETE

REGISTER NOW; RECEIVE A FREE HAT!
The first 25 people to register this month using source code MCAA will receive a free MCAA Max Hat (valued at $15.00)! The MCAA Max Hat features a 3D MCAA logo embroidered on front with a

Masonry Magazine December 2012 Page. 46
December 2012

Index to Advertisers

AIRPLACO EQUIPMENT
888.349.2950
www.airplace.com
RS #296

KRANDO METAL PRODUCTS, INC.
610.543.4311
www.krando.com
RS #191

REECHCRAFT
888.600.6060
www.reechcraft.com
RS #3

Masonry Magazine December 2012 Page. 47
December 2012

AMERIMIX
MORTARS GROUTS STUCCOS

Why Amerimix Preblended Products?

576

The choice is CLEAR:

Consistency

Labor reduction

Enhanced productivity

ASTM - pretested to ASTM specifications

Masonry Magazine December 2012 Page. 48
December 2012

MASON MIX
Type S Mortar
QUIKRETE
www.quikrete.com
800-282-5828

MASON MIX
Type 5 Mortar
COMMERCIAL GRADE
QUIKRETE

Our mortar mix on Vail's Solaris was so consistent, every bag was like the next. And the next