Masonry Magazine October 2009 Page. 9
KRANDO
METAL PRODUCTS
Est. 1987
NATIONWIDE MANUFACTURER FOR
ALL YOUR FLASHING NEEDS!!
With 22 years of service in the construction industry, Krando Metal Products, Inc. has been recognized as a premier supplier of construction products.
Mechanically keyed flashing was created to ensure moisture protection in the masonry field. It is typically used at floor level, underneath sills and over lintels. With 3" intervals, a bond is formed in the mortar bed in three locations to ensure a watertight seal without the use of other sealants (certain conditions apply). Available In: Copper, Stainless Steel, Terne Coated S/S, Lead Coated Copper & Aluminum
1. SMOOTH STEP FLASHING
2. SMOOTH STEP FLASHING (SHOWN IN COPPER & STAINLESS)
3. THREE-WAY SAWTOOTH WITH ATTACHED CORNER
4. CORNER (COPPER)
5. TERMINATION BAR
6. DRIP EDGE
7. DOWEL CAP
With the same purpose as keyed and smooth flashing, his two piece counter flashing (right) is applied where flat roofs meet rising walls. The step flashing, either keyed or smooth, has vertical locking slots that hold the insert into place. After the step flashing is installed, the insert can be set against the base flashing. The insert can be removed and reused at any time. Available In: Copper, Stainless Steel, Terne Coated S/S & Lead Coated Copper
MANUFACTURING ALL TYPES OF:
Strap, Dowel & Corrugated Anchors
Angle Clips & Bent Plate
Anchor Bolts & Threaded Rods
Miscellaneous Carbon & Stainless Steel Components.
Keyed & Smooth Flashing
2 Pc. Interlocking Flashing
Preformed Corners & End Dams
Termination Bar & Drip Edge
For more information, visit us at www.krando.com for a complete list of our machinery & capabilities. You can also call us @ 610-543-4311 for answers to any questions. WE LOOK FORWARD WORKING WITH YOU AND HOPE THAT WE CAN ASSIST YOU ON YOUR NEXT PROJECT... 05 Parkway Broomall, PA 19008 Phone: 610-543-4311 Fax: 610-543-3799 Visit us online at www.krando.com
READER SERVICE #191