Masonry Magazine June 2010 Page. 23
TOTALFLASH™
If You Ever Find An CAVITY-WALL DRAINAGE SYSTEM by Mortar Net USA, Ltd. Far More Moisture-Control Than Usual.* "Or Equal," Let Us Know.
Every modern moisture-control element has been built right into each lightweight, easy-to-use panel of pre-cut, 40-mil flashing. so everything you need arrives in one order. You just open the carton and start installing total protection! (Available in sizes for restoration, renovation, or remediation, too.)
1 5-1/2 ft. Panels of PRE-CUT FLEXIBLE FLASHING All main components are factory-assembled onto easy-to-mount flashing panels.
PreFormed Corner Boots, Stainless Steel Corners & End Dams are available, for "perfect corners" every time (over 20 pre-formed shapesk
2 Built-In NO-CLOG DRAINAGE MATTE lets water pass, unobstructed to Weep Tabs.
All Screws & Adhesive Tubes included in each box of TOTALFLASH™
7 Built-In NO-CLOG WEEP TABS deliver moisture to the outside of the building.
3 Built-In TERMINATION BARS with pre-drilled holes, allow quick, one-man installation.
4 Built-In EDGE DAM directs moisture out of building.
6 Built-In STAINLESS STEEL DRIP EDGE releases moisture away from building.
5 Clearly Specified LAP JOINTS enforce complete secure coverage.
Standard height is 18"; 12, 15, and custom heights and configurations are available for restoration work, windows, doors, etc. Uses 40-mil polymeric, reinforced, UV stable flashing membrane, incorporating DuPont's Elvaloy KEE polymer.
*Half (Or Less) Your Usual Time & Labor Costs.
ONE Mason Can Install TOTALFLASH In 1/3RD THE TIME It Takes For TWO Masons To Install Ordinary Flashing Elements!
That's right--one-third the time, meaning one-third the labor costs! See for yourself: Go to www.MortarNet.com and watch the exciting "TOTALFLASH CHALLENGE" competition, held at 2008's World of Concrete convention.
It's TOTAL protection, installed in a FLASH! ARCAT Sweets 800-664-6638 MortarNet.com READER SERVICE +148