Masonry Magazine October 2010 Page. 14
NEW PRODUCTS
TO SUBMIT A NEW PRODUCT: Contact Jennifer Morrell Email: jmorrell@lionhrtpub.com
Braxton-Bragg Offers Bosch Angle Grinder
Braxton-Bragg
Knoxville, Tenn.
Braxton-Bragg is now offering the Bosch 5-inch Angle Grinder. With its Bosch Constant-Response circuitry, it provides a soft-start; maintains constant speed under load, and provides overload protection. A reversed airflow pulls air into the rear of the grinder, and then expels it forward, keeping the internal motor cleared of stone debris that would have been pulled into air intake. It features the vibration control handle, which reduces vibration up to 60 percent, as well as the Kickback stop that shuts the tool down should the wheel get into a bind situation. Also featured is a 5/8- to 11-inch spindle for mounting a wide variety of accessories.
www.braxton-bragg.com
READER SERVICE #260
Interface for Fleet Tracking, Management
Networkfleet Inc.
San Diego
Networkfleet Inc.'s new streamlined user interface provides fast and easy access to detailed vehicle performance and fleet tracking information, larger maps, better access to reports, and easy, intuitive navigation. With an entirely rebuilt infrastructure that takes advantage of the latest technology innovations, the resulting design requires 50 percent fewer mouse clicks to retrieve detailed data on fleet operations. The interface was designed with direct input from fleet owners and managers across Networkfleet's large customer base. The system includes integrated help and online video training to shorten the learning curve.
www.networkfleet.com/demo
READER SERVICE #263
6260 LED Beacon Redesign
ECCO
Boise, Idaho
With a new design, ECCO's 6260 now features a lower profile lens that is only 4.9 inches high, three 3-watt LEDs, and Pulse8 flash operation (eight flashes per cycle, 70FPM), producing a warning signal ideally suited to industrial applications. The cost-effective unit has a wide operating range of 12 to 80V, making it the perfect light for use on electric vehicles. A long, trouble-free service life and low-amp-draw characteristics of LED technology make this an ideal replacement solution for rotating or strobe beacons. It's available in amber only, with a choice of two bolt or 1/2-inch pipe mount, and it includes a five-year warranty.
www.eccolink.com
READER SERVICE #261
Stone Construction Adds Diamond Blades
Stone Construction Equipment, Inc.
Honeoye, N.Y.
Stone Construction Equipment Inc. has added a diamond saw blade line to compliment its Saw Devil Masonry and Concrete Saw Lines. The new saw blade line covers the most common sizes for the vast majority of cutting applications. The 26 primarily general-purpose blades in the line fall into two categories: Saw-lect, the value line, and Saw-preme, the premium Sine. The laser-welded blades are well balanced and flatter, therefore delivering faster, straighter cuts, every time. Sizes range from 12 to 20 inches, with bond ratings from three to eight, to cut brick, block, stone, cured concrete, green concrete, asphalt and asphalt over concrete.
www.stone-equip.com
READER SERVICE #264
K970 Power Cutter
Husqvarna Construction Products
Olathe, Kan.
Husqvarna Construction Products" K970 is an innovative power cutter that is better able to facilitate the work of cutting professionals. The addition of the K970 completes Husqvama's new line of power cutters, which were unveiled at the World of Concrete 2010. The K970 replaces the K960 power cutter. In addition to advanced technical features, the K970 has outstanding ergonomics. Several improvements include a rear handle that has been equipped with a soft insert to ensure the operator has a better grip and hip support; a tank lid located to better accommodate filling: and a vibration dampening system that reduces operator fatigue and enables a longer cutting time. The K970 is well suited for cutting concrete and stone in reconstruction, renovation and new construction jobs.
www.husqvarna.com
READER SERVICE #262
Product & Service Information
www.masonrymagazine.com
888-303-5639, Ext. 230
We've made it fast, easy and convenient to request FREE information about any product or service in this issue.
To request information online, go to: www.masonrymagazine.com. Click on 'FREE Product Information (right top comer) then...
1. Select the issue of the magazine you are reading
2. Check the box next to the advertiser or reader service you are interested in
3. Provide your name, address and business information
4. Click submit.
Not close to your computer? Request information by phone. Dial toll-free 888-303-5639, Ext. 230. Follow the voice guidelines to request FREE information.
In a hurry and need the information now? We have provided the advertisers' Web sites and phone numbers in the 'Ad Index' toward the back of this issue. You can call direct for information on the products and services advertised in this issue. Don't forget to tell them you saw their ad in MASONRY Magazine.
www.masonrymagazine.com
12 MASONRY October 2010 www.masoncontractors.org
The Voice of the Masonry Industry