Dry-cast manufacturing

Words: David BenincasaFor many years, architects and builders have appreciated the benefits of utilizing thin masonry veneers for a variety of projects. With the aesthetic appeal of full‐depth brick or natural stone, thin veneers typically cost significantly less to ship and install, can be used for both interior and exterior applications, and do not require the additional footings of natural stone or full‐depth masonry — all of which set thin veneer as the economical, versatile option for a multitude of architectural uses.

The manufacturing process developed to create these natural‐looking masonry products denoted the first step in the evolution of thin veneers. Now, the innovative new dry‐cast manufacturing process developed and patented by Oldcastle® Architectural Products has resulted in two new revolutionary products that represent the next step in this continued evolution.

Developing the “Natural” Stone Look

Industry‐wide, thin stone veneer is typically manufactured through a wet‐cast process, for which a mold is created by spraying latex over the surface of pre‐arranged natural stones. During the manufacturing process, the latex mold is placed in a metal pan and handpainted with colorant that will become the external colors of the manufactured stone units. Wet concrete is then poured into the mold, vibrated, and stored for 48‐72 hours to set and cure. Finished stones are then pulled from the molds and shipped for installation. After time and several uses, the latex molds may become fragile and degrade, sometimes tearing during the stone removal process. And because the colorant is only an external layer, the product may chip during shipping or installation, exposing the non‐colored concrete beneath. In addition, cutting the product reveals the aggregate on the interior of the unit, thus requiring the use of specialized corner pieces and trim for a finished look.

Introducing Dry-Cast Manufacturing

By developing the revolutionary dry‐cast manufacturing process, Oldcastle both streamlined production and created a superior product. This dry‐cast method begins by scanning natural stone with a new innovative process and turning those scans into patented mold technology, which has a significantly longer life span than latex or rubber. A low moisture mixture of fine aggregates, cement, admixture and integrated colorant are densely compacted into the molds, then stripped from the molds and cured in a high‐humidity environment for 24 hours. The resulting stones offer a PSI strength that is two to three times stronger than traditional thin veneer and have color integrated throughout the unit, which eliminates the need for special corner pieces and reduces waste caused by chipping. Dry‐cast stones are freeze‐thaw resistant, water resistant, and fade resistant.

Meet the Next Generation

Two new thin veneers were born from dry‐cast manufacturing in 2015: Hillcrest™ Stone and Kensley™ Stone thin veneers. The latest in Oldcastle Architectural’s line of Artisan Masonry Stone Veneers™, Hillcrest Stone offers a modular stack‐stone look with a tight dimensional tolerance, and Kensley Stone boasts a traditional ashlar pattern with a 3/8” mortar joint and is designed to emulate natural limestone. Both veneers weigh under 15 pounds per square foot and are available in six color blends. A third style, Westpeak™ Stone, is planned for release in early 2016. In the continued evolution of the veneer industry, Oldcastle is currently working with a network of distributors to gain product placement, as well as partnering with national and regional homebuilders.
Contractor Tip of the Month: Get Used to the Pain
April 2026

Pain isn’t just negative; it’s a natural part of growing and improving. Instead of seeing pain as a reason to quit, recognize it as a sign you’re making progress. What sets successful people apart is their ability to stay calm and keep going when things g

Damian Lang
Contractor Tip of the Month
Read More
Fechino Files: Diesels Below 32 Degrees
April 2026

I am guessing that if you are reading this, then you experienced the cold, late-January spell that took over most of the country. The cold weather has many effects on the operations of a masonry contractor, from job shutdowns to equipment starting issues,

Steven Fechino
Fechino Files
Read More
Outreach Outlook: Building Momentum Across the Southern Region
April 2026

As April arrives, the pace of our outreach and workforce efforts across the Southern Region reaches a new level of intensity. This is the time of year when our programs, partners, and state collaborators all accelerate at once. SkillsUSA competitions are

Conner Birdsong
Outreach Outlook
Read More
Marvelous Masonry: Elbphilharmonie
April 2026

Most people know the Elbphilharmonie for its glass façade and dramatic roofline. From a distance, that’s what defines the skyline in Hamburg’s HafenCity district. But for masonry contractors and suppliers, the real story starts at the base.

Cass Stern
Marvelous Masonry
Read More