Vertical rebar positioners

Words: Mike Ripley/Public/News/20120519070000-1.jpg" width="600" height="338" border="0" alt="Vertical rebar positioners aid the mason contractor in centering the bars in the core of the block." />
Vertical rebar positioners aid the mason contractor in centering the bars in the core of the block.
Vertical rebar positioners have been part of the masonry accessory package for many years. They add no structural value to the wall, but aid the mason contractor in centering the bars in the core of the block and also help to simplify the lapping process.

The most popular and economical positioners for vertical applications are the Figure 8 or S type and the O ring. They are installed perpendicular to the plane of the block crossing the core with the wire loops centered. Positioners are set in the mortar of the bed joint for stability and vertical spacing is about every four feet.

Placement tolerances for single rebar applications are listed in Specification for Masonry Structures (TMS 602-08/ACI 530.1-08/ASCE 6-08) under Part 3 — Execution 3.4 B.8. Working from the center point of the core you are allowed + ½ inch in the width or thickness of the wall and 2 inches along the length of the wall. This leaves you a space in the core center of 1 inch wide by 4 inches long to be code compliant for vertical applications.

Some masons install bars manually (by sight) and others with the aid of positioners but all with the risk of not meeting code. While the use of rebar positioners greatly narrows the margin of error, they also move during installation due to sitting on top of the shelf of the CMU and moving when mortar or the next course is applied.

A new trend in vertical rebar positioners has emerged to solve the movement issue during installation. Core inserted positioners, which are designed to fit 1½-inch deep, cross the core diagonally and fit tightly in the corners of the core. The core positioners perfectly position the bars in the code compliance zone and allow no movement during installation. They also have an extended tail section (safety bend) so if installed incorrectly (out of plane), the tail will extend outside the wall alerting the mason to turn it in the opposite position.

Double vertical core positioners are also available but with a different design, spacing the loops or guides closer to the face shell of the CMU. To complete the family there is a bond beam positioner that positions bars in the lower one-third of the unit and ½-inch off the inside face shell.

Take the guesswork out of rebar placement by using the core inserted positioners.
Contractor Tip of the Month: Get Used to the Pain
April 2026

Pain isn’t just negative; it’s a natural part of growing and improving. Instead of seeing pain as a reason to quit, recognize it as a sign you’re making progress. What sets successful people apart is their ability to stay calm and keep going when things g

Damian Lang
Contractor Tip of the Month
Read More
Fechino Files: Diesels Below 32 Degrees
April 2026

I am guessing that if you are reading this, then you experienced the cold, late-January spell that took over most of the country. The cold weather has many effects on the operations of a masonry contractor, from job shutdowns to equipment starting issues,

Steven Fechino
Fechino Files
Read More
Outreach Outlook: Building Momentum Across the Southern Region
April 2026

As April arrives, the pace of our outreach and workforce efforts across the Southern Region reaches a new level of intensity. This is the time of year when our programs, partners, and state collaborators all accelerate at once. SkillsUSA competitions are

Conner Birdsong
Outreach Outlook
Read More
Marvelous Masonry: Elbphilharmonie
April 2026

Most people know the Elbphilharmonie for its glass façade and dramatic roofline. From a distance, that’s what defines the skyline in Hamburg’s HafenCity district. But for masonry contractors and suppliers, the real story starts at the base.

Cass Stern
Marvelous Masonry
Read More