Passing the Trowel: A Conversation with Ray Fleming

Words: Cass Stern

In the masonry world, experience is measured not just in years but in the bricks laid, the structures built, and the challenges overcome. Ray Fleming, a 77-year-old veteran mason with a career spanning several decades, offers a wealth of knowledge and insight into what it takes to succeed in the masonry industry. In a recent interview with the Mason Contractors Association of America (MCAA), Fleming shared his journey, lessons, and advice for those entering the trade. His story reflects not only his personal journey but also a broader commentary on the evolution of the masonry industry itself.

Fleming's journey into masonry began at age 12, inspired by his stepfather, a residential mason contractor. Watching his stepfather build basements ignited a passion in Fleming for hands-on work. "I realized that I excelled better with hands-on stuff rather than in the book studying," he recalled. The satisfaction of creating something tangible and lasting, of driving by a structure he helped build, solidified his decision to pursue a career in masonry.

This early exposure to the craft laid the foundation for a lifelong career. Fleming’s fascination with building something real that could stand the test of time was a powerful motivator. For him, masonry was not just a job but a way to connect with his surroundings and contribute meaningfully to his community. This passion for creating with his hands and constantly improving his craft stayed with him throughout his career, driving him to master his trade and become a respected figure in the masonry community.

 

Every career comes with challenges; for Fleming, working at heights was a significant hurdle. Reflecting on his early years, he recounts a particularly daunting experience during a project at Michigan State University in the 1960s. "It was winter, one of those beams twisted one time, and a scaffolding dropped," he said. The incident, which occurred while working on a 110-foot wall using hanging scaffolding, underscored the importance of learning to work comfortably and safely at heights. It was a pivotal moment in his career, one that taught him the value of safety and the importance of being well-prepared for the job's physical demands.

Despite these challenges, Fleming found immense joy in his work, particularly in chimney restoration. He describes the process with pride: "A chimney gets a crack in the cap or an improper cap, water goes down, and I get to disassemble it, replace the flues, pour a proper cap, wash my brick, put sealer on it. That's my favorite part." For Fleming, the satisfaction of restoring a structure to its former glory and ensuring its longevity is what makes the hard work worthwhile. This type of work allows him to see the immediate results of his efforts and gives him a deep sense of accomplishment.

Fleming's ability to find joy in his work, even in tasks that others might find mundane, speaks to his passion for the craft. His focus on quality and attention to detail, especially in restoration work, highlights his pride in his craft. This passion is a defining characteristic of his career and a key reason for his success.

When asked what advice he would offer to new masons, Fleming emphasized the importance of continuous learning. "One thing that I learned through the Michigan Masonry Institute is that masons should learn the trade. Trade goes on for 20, 30, 40 years. And just because you learned it back in the 60s, technology changes." He highlighted the advancements in the industry, such as the introduction of control joints and waterproofing, and stressed the need for masons to stay updated with modern-day technology and industry changes.
 
  

Fleming's emphasis on education and adaptability is particularly relevant in today's rapidly evolving construction industry. With new materials, techniques, and technologies emerging, staying informed and continuing to learn is crucial for success. He believes that masons willing to embrace these changes and continuously improve their skills will remain relevant and have a significant edge over those who do not.

He also believes passion is a critical differentiator between a good and a great mason. "Loving what you do" is essential, and he’s seen firsthand the difference it makes. He recounted instances where young masons treated the job merely as a means to earn money, without any long-term commitment. For Fleming, creating a serious career out of masonry, with dedication and a love for the craft, truly sets great masons apart.

Fleming’s perspective on passion and dedication serves as a powerful reminder that success in any field requires more than just skill—it requires a genuine love for the work. His advice to new masons is to fully commit to their craft, to learn as much as possible, and to approach each project with enthusiasm and a desire to excel.

One project stands out for its personal significance among the many Fleming has worked on. A dermatologist approached him with a unique request for his chimney. "He says, ‘I don't know. Can we put a stone in there with my wife's name on it or something?’" The dermatologist’s wife had recently passed away, and Fleming, along with some interior design experts, came up with a special way to honor her memory. They commissioned a 36-inch diameter limestone, which was engraved with a special message and then incorporated into the chimney. This project, blending craftsmanship with a personal touch, is one that he holds particularly dear.



This project exemplifies Fleming’s ability to combine technical skill with creativity and sensitivity. It wasn’t just about building or repairing a chimney but about creating something meaningful for the client, something that would serve as a lasting tribute. His consultation with designers and engravers and seamless integration of the stone into the existing structure demonstrate his commitment to excellence and his understanding of the emotional impact that masonry can have.

For Fleming, this project is more than just a professional accomplishment; it’s a testament to the power of masonry to create lasting memories and touch people’s lives in profound ways. It’s a reminder that, at its best, masonry is not just about building structures but about building relationships and leaving a legacy.

For those contemplating a career in masonry but unsure if it’s the right path, Fleming’s advice is clear: take it seriously. "If you're going to be a bricklayer, number one, learn all you can and get all your credentials." He emphasized the importance of understanding the intricacies of the trade, from the different types of mortar to the various bonds used in masonry. He also pointed out that some masons lack basic knowledge about materials like Type S or Type N mortar, which can be a critical oversight.

In his view, a successful masonry career requires skill and a commitment to learning and mastery. He stresses that understanding the basics, such as the different types of mortar and their appropriate uses, is foundational to becoming a proficient mason. This knowledge and hands-on experience allow masons to excel in their craft.

 

Fleming’s message to those on the fence about entering the masonry industry is one of encouragement but also of challenge. He makes it clear that while masonry can be a rewarding and fulfilling career, it requires dedication, hard work, and a willingness to learn. For those who are willing to put in the effort, the rewards—both personal and professional—can be substantial.

Ray Fleming’s career is a testament to the enduring appeal of masonry as both a craft and a profession. His journey from a young boy inspired by his stepfather to a seasoned mason with decades of experience offers valuable lessons for anyone in the industry. Whether it’s the importance of safety, the joy of restoration, or the need for continuous learning, his insights provide a roadmap for success in the masonry business.

As the industry evolves, Fleming’s principles—dedication, passion, and a commitment to excellence—will continue to be the cornerstones of great masonry work. His words inspire and challenge those entering the field to build not just with bricks and mortar but with heart and purpose. In doing so, they will not only contribute to the legacy of masonry but also create their own lasting impact on the built environment and the lives of those they serve.


About: Spotlight
Insurance Shouldn’t be Scary

Navigating the world of insurance can be daunting, especially for masonry contractors in need of quality coverage and risk management support for their complex and unique circumstances. Yet, working with your insurance company shouldn’t be a haunting expe

Understanding OSHA Regulations for Masonry Contractors in the USA

Masonry contractors in the USA must adhere to Occupational Safety and Health Administration (OSHA) regulations to maintain a safe work environment. OSHA, the federal agency responsible for worker safety, sets stringent guidelines to protect workers from t

About: Featured
InDigital Partners with the Mason Contractors Association of America to Elevate Video Content in the Masonry Industry

InDigital, a leader in digital media solutions, is thrilled to announce a new partnership with the Mason Contractors Association of America (MCAA). This collaboration will focus on leveraging InDigital’s expertise in video content creation to transform

Building Correctional Facilities with Strength and Efficiency: Amerimix Provides Solid Results for Construction of Louisiana Correctional Institute for Women

The Louisiana Correctional Institute for Women (LCIW), located in the heart of St. Gabriel, Louisiana, needed a complete rebuild after damage from a devastating flood in 2016. The inmates were relocated to other prisons from 2022 to 2024 while the series