Masonry Magazine December 2005 Page. 8

Words: Joel Guth, Jeb Hensarling, Michael Adams, John Dolce, Brad Kirkpatrick
Masonry Magazine December 2005 Page. 8

Masonry Magazine December 2005 Page. 8
President's Message

G. Alan Griffin
President. Mason Contractors Association
of America

Silica Task Force Update

As you are probably aware, MCAA has been heading up the Construction Industry Silica Task Force for the last two years, as well as collecting data and drafting a task-based proposal to limit employee exposures to respirable crystalline silica. While we believe our task force document is very sound, additional data collection remains to be completed. To that end, MCAA's director of government affairs, Marian Marshall, has had numerous discussions with the National Institute for Occupational Safety and Health (NIOSH) about collaborating with them on future data collection efforts and research.

This task-based approach is not only the most effective means, both technologically and economically, for achieving our goals, but it is also the approach supported by NIOSH. Having this additional support may be critical in convincing OSHA that the Silica Task Force's findings should be the basis for any future silica standard that the agency develops.

And, concerning the OSHA standard, readers should be aware that OSHA published its semi-annual regulatory agenda on Oct. 31, and it is moving forward with a proposed rule on silica. OSHA also mentions proposals by the Building Trades division of AFL-CIO, as well as the American Society for Testing and Materials (ASTM). Both proposals contain requirements for exposure monitoring and medical surveillance, which would be cost-prohibitive for the industry, to say the very least.

The ASTM proposal is particularly problematic because they are developed as "national consensus" standards and, under the law, OSHA is required to adopt the provisions of "national consensus" standards or indicate why the approach the agency is taking is more effective.

The next integral part of this whole puzzle is the OSHA risk assessment. The risk assessment is the barometer, if you will, for what the agency will ultimately decide to propose as a comprehensive standard for addressing workplace exposures to respirable crystalline silica. The risk assessment is simply this a group of scientific studies that have been reviewed by OSHA and are found to contain significant evidence that the health effects of silica warrant further review. It is expected that this risk assessment process will be completed in April 2006. For the very first time, OSHA will release this risk assessment for public comment. Once published, the Silica Task Force will undertake an in-depth, critical analysis of this document and determine whether or not adjustments in our task force document may be necessary.

In the meantime, we have a lot of work to do, but at this stage of the game - all the pieces seem to be coming together very well. We are dedicated and on course to present an excellent set of recommendations to OSHA for limiting occupational exposures to respirable crystalline silica on construction job sites.

This is an enormous undertaking, but one that will prove the most effective in protecting the health of our workers while also preserving the integrity of our industry.

Finally, many thanks to Marshall and Mark Kemp, MCAA member and chairman of the Silica Task Force, for their hard work and dedication on this issue.

MCAA

New Members

The Mason Contractors Association of America is proud to welcome the following new members to the Association. MCAA would like to take this opportunity to thank them for joining their fellow mason contractors nationwide in helping to build a stronger masonry industry. MCAA's members look forward to a long affiliation with their firms.

Gateway Waterproofing & Restoration
10069 Lakeside Drive
St. Louis, Missouri
Volume Classification: A

Grande Masonry
780 Allens Ave.
Providence, Rhode Island
Volume Classification: D

Molter Corporation
P.O. Box 751
Frankfort, Illinois
Volume Classification: A

If your company is interested in becoming a member of the Mason Contractors Association of America as a contractor, supplier or instructor, please contact MCAA's Director of Membership, Melissa Polivka, at 800-536-2225, or complete an application at www.masoncontractors.org.

www.masoncontractors.org


How It's Made: Natural Stone Veneer
April 2025

Natural stone veneer is a durable, versatile, and aesthetically pleasing building material that has been used for centuries. It adds timeless beauty to masonry projects while offering structural integrity and resilience. But how does natural stone veneer

Vibing Masonry #5 - The Evolution of Concrete Masonry Units: From Ancient Foundations to Modern Innovations
April 2025

Early Development: The Genesis of Concrete Blocks (early Rome to 1900s) The history of concrete masonry units (CMUs) or concrete blocks begins with humanity’s earliest binding materials, notably the Romans’ remarkable concrete. Around AD 125, structures l

MASONRY STRONG Podcast, Episode 18 Recap: Jeff Tew, Westlake Royal Stone Solutions
April 2025

On this episode of the MASONRY STRONG Podcast, Jeff Tew joins the show, along with MCAA President Jeff Buczkiewicz, to talk about where his passion for this industry started and what it's been like working on the Supplier side of the industry. An Excitin

Westlake Royal Building Products™ Introduces New Board & Batten Profile for Royal® and Exterior Portfolio® Vinyl Siding Lines
April 2025

Westlake Royal Building Products™ (“Westlake Royal”), a Westlake company (NYSE: WLK), has introduced a next-generation Board & Batten profile for its Royal® and Exterior Portfolio® vinyl siding lines. Maintaining the timeless charm of Board & Batten whil