Standards Compliance in the Storm Shelter and Safe Room Industry

Words: Dan Kamys

Codes and Standards

By Kristopher Lamar

Storm Shelter Storm ShelterWhether designed for residential or community use, storm shelters and safe rooms protect lives during hurricanes, tornadoes and other severe weather events. Although many U.S. manufacturers claim to provide storm shelters and safe rooms, the industry is surprisingly unregulated. How can developers and engineers know for certain which storm shelters and safe rooms will withstand the most severe weather and successfully protect the lives within? The National Storm Shelter Association (NSSA) was founded in 2001 under the leadership of Dr. Ernst Kiesling, a research professor at the Texas Tech University Nation Wind Institute, to answer just this question. The first major undertaking of the NSSA was to develop an industry standard that formed the basis for the International Code Council’s (ICC) standard for storm shelters (ICC-500). Although the NSSA does not certify any shelter manufacturer or design, it does provide procedure and process to validate a manufacturer’s claim that its shelters are in compliance with the applicable standards. The process for getting verification includes debris-impact testing and wind-pressure analysis or testing of the building components. The process also includes a third-party evaluation of the designs by professional engineers and architects that have been approved by the NSSA to ensure standards compliance. Only after these processes have been successfully completed can manufacturers become Producer Members of the NSSA and affix a seal to their shelters. Fewer than 10 percent of all shelter manufacturers in the United States have achieved this voluntary process for NSSA membership. Storm Shelter Storm ShelterMany manufacturers of storm shelters and storm shelter products claim to “meet or exceed” two defining documents. The ICC-500 and the Federal Emergency Management Agency’s (FEMA) 320/361 publications are almost always used by manufacturers to ensure the safety of their product. The FEMA P320 (residential) and P361 (community) documents are intended to provide guidance for engineers, architects and manufacturers. The publications include information for the design, materials, construction methods and operation of safe rooms. FEMA does not certify that any engineer, architect or manufacturer – or their products or services – are in compliance with its guidelines. Yet, many manufacturers do claim their products are “FEMA certified” or “FEMA approved.” Certain criteria in these guidelines must be followed in order to qualify for FEMA safe room grants, but they are not regarded as standards, whereas the ICC-500/NSSA is a consensus standard. Indeed, some state and local jurisdictions in tornado- and hurricane-prone regions have mandated compliance with the ICC-500/NSSA standards. The 2015 International Building Code requires the addition of storm shelters complying with ICC-500/NSSA for certain geographic areas and building uses, such as for schools and police, fire and rescue stations. With so many products on the market, it is important that consumers understand the claims and word usage by manufacturers such as “certified” or “approved.” The NSSA process shifts the majority of responsibility for standards compliance to the shelter manufacturer. The NSSA is a nonprofit, self-policing organization, and members are required to abide with the bylaws and code of ethics of the association and pledge to produce only those shelters that meet or exceed the standard. This benefits developers and engineers, as well as the manufacturers, in a number of ways, including guidance for quality products, qualification for grants in certain regions, increased property values, and decreased liability. Choosing only those manufactures that have achieved NSSA membership status is the safest way for developers and engineers to assure that their choice of manufacturer is in compliance with standards.
Kristopher Lamar is in sales for storm shelters and safe rooms for Romtec Inc., a NSSA Producer Member.

Happening Now

PPE in Turkey Is a Fast-Growing Market

Turkey GDPSince 2012, Turkey GDP growth rate has fluctuated between 2 percent and 3 percent each year. This is good news for the national industry, but brings increasing responsibilities in health and safety at work as it happens in other emerging economies. While agencies and associations with main activities covering occupational safety issues contribute to the development of a risk-prevention culture, PPE manufacturers expand their reach into this market. For several years now, huge efforts have been made in Turkey to improve deficiencies and meet international Health & Safety standards. The EU Workplace Health and Safety Directive has served as a framework for Turkish occupational safety legislation. It is, perhaps, not by chance that Occupational Health and Safety Regulation was the first regulation to ensure compliance with the EU requires. As safety standards are tougher, the stakes are high in the Turkish industry to better protect the 23 million-strong working population. Yet, injuries are still numerous, particularly as for hands. In the construction industry for instance, infected organs as a result of occupational accidents were 11 percent related to hands, and 19 percent to fingers in 2014. In the Turkish shipyard industry, figures are even more revealing. Consider above-average economic growth, development of health prevention, increase of different types of risks. Turkey has also become full of opportunities for PPE manufacturers such as Mapa Professionnel. Mapa entered this market in 2013. Since then, Mapa Professionnel gained significant share and brand reputation within a short period. Through intensive marketing campaigns and top-level workouts, Mapa managed to enter various key accounts, mostly in automotive, chemical, metal work, electronics and food sectors. Mapa’s wide range of products offers the right solution for every hand that works. In 2015, Mapa Professionnel will offer a new Grip & Proof series, as well as other gloves. Turkey is indeed a safe place to work, just like any other.
Are Your Employees Safe While Working In Hot Weather?

As the temperatures rise outside during summer months, so do the risks that employees working in hot conditions may be harmed by the dangerous effects it can have. Exposure to high temperatures can be deadly.1 It’s your responsibility as a business owner

Maximizing Efficiency with CrewTracks

In the masonry industry, efficient project management is crucial for success. CrewTracks addresses this need by streamlining various aspects of daily operations.

SOLA Innovation: Digital Levels

In 2021, SOLA introduced a new generation of digital levels at the World of Concrete. Because it was in the midst of Covid it wasn’t the most well-attended show, but we were optimistic. We attended, showcasing both our SOLA and Keson brands. The standout

Bonding with Masonry 2024 Q2

This issue’s questions come from an Architect, an Engineer. and a Mason Contractor. What questions do you have? Send them to, attention Technical Talk.