28 Deaths From Aerial Platforms by Q2 2013

Words: Dan Kamys28 Deaths From Aerial Platforms by Q2 2013

There were 28 fatalities worldwide involving mobile elevating work platforms (MEWPs), also known as aerial work platforms (AWPs), in the first half of 2013, according to findings from IPAF’s accident database.

The main causes of these fatalities were overturn (10), fall from height (9), entrapment (5), electrocution (3), and impact with MEWP (1). Thirteen of the fatalities involved booms (3b), 10 involved scissor lifts (3a), and three involved vehicle mounts (1b). In two cases, the machine type was unknown.

Of these fatalities, 13 occurred in the United States, two each in France, Germany, the Netherlands and the United Kingdom, and one each in Armenia, Canada, Ireland, Malaysia, Norway, Spain and the UAE.

While releasing these findings, IPAF also updated the 2012 preliminary results following the reporting of a previously unrecorded fatal accident in Canada in October 2012. This brings the total fatalities in 2012 to 32, instead of the 31 initially reported.

Compared with the first half of 2012, which saw 17 fatalities reported, the number of fatalities reported for the first half of 2013 has increased by about 65 percent. IPAF believes that the accident reporting project is capturing more data, not necessarily that there are more accidents. While the main causes of fatalities were fairly evenly spread in the first half of 2012, the first half of 2013 saw a rise in the number of fatalities resulting from overturn and fall from height. The fatalities in the first half of 2012 involved more booms (3b) and vehicle mounts (1b). Those in the first half of 2013 involved more booms (3b) and scissor lifts (3a).

“Findings from IPAF’s rental market reports lead us to estimate that there are more than one million MEWPs in the world,” says IPAF CEO Tim Whiteman. “Every fatality is one too many, but these figures show that powered access equipment remains a safe way to carry out temporary work at height.”

“The accuracy of the data relies upon those using MEWPs and other interested parties to report any known fatal accidents to IPAF at www.ipaf.org/accident or to an IPAF member of staff,” says IPAF technical officer Chris Wraith. “The comprehensiveness of the data cannot be guaranteed, but where appropriate, action is taken to verify the facts. The data is updated should relevant information become available.”

IPAF’s accident data is based on information collected in a number of ways: directly reported to the IPAF accident database at www.ipaf.org/accident, information obtained by IPAF staff worldwide, and information collated from press releases and news reports.

All manufacturers, rental companies, contractors and users are encouraged to report any known fatal and serious accidents involving mobile elevating work platforms (MEWPs) and mast climbing work platforms (MCWPs) worldwide at the IPAF accident database. The project is open to IPAF members and non-members, and includes an option for anonymous reporting.

All data collected is confidential and none of the detail of any accident is shared with third parties or disclosed to safety authorities unless required to by legal writ. The only exception to this is that manufacturers will be given basic data if a machine manufactured by their company is involved in a fatal accident.

To register and to report an accident involving a MEWP or an MCWP, go to www.ipaf.org/accident.

Manufactured Stone Veneer or Thin-Cut Natural Stone: Which One is Right for Your Next Project?
May 2026

Stone continues to be a go-to material in both residential and commercial construction, used for its texture, depth and ability to elevate a façade or interior space. For masons, general contractors, builders and design professionals looking for lightweig

The Behind-the-Wall Secrets Every Mason Already Knows (But Some Ignore)
May 2026

You’ve been around long enough to know this already: stone doesn’t fail on the face; it fails behind the wall. You can lay the prettiest veneer in the county, but if the prep is junk, that wall’s gonna start telling on you after a couple of winters. Manu

Masonry Innovation in Action: Belden Brick’s Glazed Thin Brick Redefines Design Possibilities
May 2026

Masonry innovation is pivotal in shaping the built environment, and The Belden Brick Company is at the forefront of this evolution. Architects, designers, and contractors increasingly seek materials that marry high performance with bold aesthetics, and Be

Celebrating Craftsmanship and Country
May 2026

The 250th anniversary of the United States is more than a date. It is a reflection of centuries of progress, innovation, and determination. STABILA has chosen to mark this milestone with a product that mirrors those same qualities. The Patriot Series Maso