August 2013: MCAA Report

Words: Dan KamysAugust 2013 alt MCAA Report

Membership dues paid to the Mason Contractors Association of America (MCAA) are the largest source of funding that we have. Its importance cannot be understated. It's a vital part of the association that enables us to continue to fight for our industry on behalf of all mason contractors.

Our involvement on all fronts – from regulatory reform to education and training – continues to ensure the survivability and viability of our industry for generations to come. Below is a list of some of our recent successes supported by MCAA membership dollars, followed by a brief outlook for the year ahead.

BIM software development

Phase 1 of the BIM Software Development program is complete. Phase 1 has given the industry a roadmap forward to implement a fully operational BIM for Masonry program. Phase 2 of the process was formally kicked off June 1, 2013. Phase 2 will see contractor education, and input is a major emphasis. Phase 2 will have contractor education initiatives rolled out and will take up to 18 months to complete. It is during this time that the vast majority of “what contractors need from BIM” will be developed, and then the tools for contractors to access those wants will begin in the form of education.

This is an exciting step forward in the process and will offer huge opportunities for contractors. The entire process is projected to take about five years. When complete, masonry will level the playing field with competing systems and will be at the very beginning of the development process in building design.

Single-wythe wall study

The MCAA has partnered with the International Masonry Institute (IMI) and the Canadian mason contractors to engage the University of Louisville to conduct a study. The study will help make it possible to design single-wythe masonry walls in climate zones 3-6, in spite of the new IECC code. We expect to receive results of this study this summer and begin to promote those results soon thereafter.

A large component of this study will deal with thermal mass and its impact on R-values. The results of the study are showing that thermal walls with lower R-values perform better than walls without thermal mass at higher R-values. This research will be invaluable in fighting for changes to energy codes that impacted single-wythe walls, and getting better designs that are more energy efficient with thermal mass walls and lower R-values.

New learning experiences for contractors

The MCAA introduced new Networking Sessions at our two face-to-face meetings. These new sessions replaced our old educational programs. At our Midyear Meeting, we broke into five breakout sessions by employment classification. Participants discussed some pre-developed questions about best practices within their companies, and then had an open forum on topics the participants wanted to learn more about. It was so popular that it was carried over to our Annual Convention. The sessions were conducted in a mobile classroom on the show floor.

In addition to this experience, the MCAA introduced the “webinar season pass.” This concept offers programs and educational opportunities for your entire company, all year long. We are looking to reach beyond a key contact and give benefits to your entire firm. New programs are offered weekly and are recorded for on-demand viewing. This brings the educational experience to your doors and gives great opportunities to everyone within your company. was re-launched Feb. 7, 2013, during the MCAA Convention at the World of Concrete/World of Masonry in Las Vegas. The site allows visitors to determine which masonry wall system is right for their next buildings, learn why masonry structures outlast and outperform every other building system, and discover the beauty and versatility of bricks, blocks and stone. The goal for the redesign was to create a user-friendly, aesthetically pleasing, and informative website that would be used as a masonry resource for architects, owners, contractors, masonry suppliers and other decision makers.

Masonry wall systems, along with an updated and easily visible Details, Benefits, Gallery, Knowledge, Communication and Resources sections, are highlighted on the website. Each section includes updated graphics, links to other resources, and cross-references to other sections on the site. Since re-launching, more than 400,000 visitors have viewed the new, and the site has received more than 1 million hits.

The Year Ahead

Silica initiatives. It is expected that OSHA will finally release a new silica rule this year. In preparation for this rule, the MCAA has reconvened and been active in the silica coalition made up of more than 20 construction associations, including the Home Builders, AGC, ABC, ASA, Roofers and more. This coalition will hire a law firm to develop an independent economic impact study of construction, as well as develop a response and questions about the new required PEL level. This level is believed to be half of the current PEL, which would be 50 (from the current 100) with an action level of 25.

This would be economically devastating to the construction industry and harmful to our industry, in particular. In addition to the economic issues, there are great concerns about the technological feasibility of our industry to be able to meet these new PEL levels. Those arguments will be discussed in detail in the industry’s response to the new rule.

MQI redevelopment. Another program happening in 2013-14 is the redevelopment of our Masonry Quality Institute program. This program will be redeveloped and designed in consultation with eight different contractors from around the country. Their knowledge and experience will be the basis of the course.

In addition to a great program, attendees also will take away from the program an outline of a company quality assurance program. As they work through the program, they will fill in the outline to make it company specific. We have had numerous requests for quality assurance programs, and this class will now offer that opportunity. The class will be more economical for attendees and will likely see webinar-based learning opportunities.

Continued development of contractor-to-contractor educational opportunities. The MCAA is committed to bringing more educational opportunities to contractors, which will give them real-life experience and learning opportunities from one another. The MCAA is in the process of developing a new opportunity for contractor-to-contractor learning by visiting jobsites, facilities, yards, etc. Look for the first opportunity late this winter (of course, in a warm climate), sometime soon after the convention.

As the year continues, more exciting opportunities for our association undoubtedly will develop. We need your continued support to maximize our opportunities and serve the needs of our industry.

Jeff Buczkiewicz is the president and CEO of the Mason Contractors Association of America (MCAA), and has worked in the masonry industry for several years as the executive VP of the Building Stone Institute and the director of marketing and membership for the MCAA. He also has served as secretary on the board of the Natural Stone Council and is a former board member of the StonExpo Federation.

Return to Table of Contents

Westlake Royal Building Products™ to Showcase Be Boundless™ Campaign, Top Industry Trends and New Product Innovations at Pacific Coast Builders Conference (PCBC)

HOUSTON (June 18, 2024) — Westlake Royal Building Products™ (Westlake Royal), a Westlake company (NYSE:WLK), will showcase its Be Boundless™ campaign, top industry trends and new product innovations at the Pacific Coast Builders Conference (PCBC) in Anahe

Bringing Bricks Back To Life

BrickRecyc, a machine that removes old mortar from bricks, was invented by three entrepreneurs from Quebec in 2021. Tommy Bouillon, David Dufour, and Hugo Cartier were the innovation's source. The invention emerged out of necessity. Tommy Bouillon, head o

Are Your Employees Safe While Working In Hot Weather?

As the temperatures rise outside during summer months, so do the risks that employees working in hot conditions may be harmed by the dangerous effects it can have. Exposure to high temperatures can be deadly. It’s your responsibility as a business owner

Maximizing Efficiency with CrewTracks

In the masonry industry, efficient project management is crucial for success. CrewTracks addresses this need by streamlining various aspects of daily operations.