Bill and Melinda Gates Foundation Courtyard

Words: Dan Kamys

>>> Case Study:??Hardscaping

A sand mix and veneer stone mortar project in Seattle Bill and Melinda Gates Foundation Courtyard

The Bill and Melinda Gates Foundation Campus features a 70,000-square-foot stone paver plaza, constructed with several Quikrete underlayment and grouting products. Quikrete Sand/Topping Mix was used for the two-inch-thick paver underlayment over a cast-in-place concrete slab for all exterior installations.

Quikrete Polymer Modified Veneer Stone Mortar then was mixed and pumped into the one-half-inch paver joints. The veneer stone mortar was factory pre-blended with integral colors to compliment the natural stone colors.

Additionally, a white polymer modified veneer stone mortar formulation was manufactured to match an imported German limestone.

Bill and Melinda Gates Foundation Courtyard

Quikrete Multi-Purpose Thin Set, a polymer modified thin set, was used for the installation of all interior stone tile. Quikrete Polymer Modified Veneer Stone Mortar exceeds the ASTM C 270 requirements for Type S Mortar and exhibits two-times the sheer bond strength of standard Type S Mortar.

The general contractor on the project was Johnston Construction and commenced in March 2010, with completion in September 2010. Quikrete products used included 3,000-pound Sand Topping Mix (447 bulk bags); 50-pound Multi-Purpose Thin Set (5,229 bags); and 80-pound Polymer Modified Veneer Stone Mortar – Colored (966 bags green, 1,050 bags charcoal and 84 bags white).

Bill and Melinda Gates Foundation Courtyard


Hultafors Group Continues Gold Partnership in the 2026 Masonry Alliance Program
November 2025

The Mason Contractors Association of America (MCAA) is pleased to announce that Hultafors Group will continue its Gold partnership in the 2026 Masonry Alliance Program.

Are you in the Insulated Concrete Block business? Then FTC Rule 460 applies to you…
November 2025

If you supply, sell, or use any of these… Pre-insulated concrete block... Loose-Fill Insulation... Injectable Foam-in-Place Insulation... Foam Plastic Inserts... Then you must abide by FTC Rule 460, 16 CFR 460, which governs R-value testing and claims

MASONRY STRONG Podcast, Episode 33 Recap: Dawn Rogers, Executive Director at Arizona Masonry Council
November 2025

On this episode of the MASONRY STRONG Podcast, we're happy to be joined by Dawn Rogers from the Arizona Masonry Council to talk about her journey in the masonry industry, as well as give her insight as to what the future of the industry looks like.

HangTite Blended Cement Products Joins the 2026 Masonry Alliance Program as a Gold Partner
November 2025

The Mason Contractors Association of America (MCAA) is excited to announce that HangTite Blended Cement Products has joined the 2026 Masonry Alliance Program (MAP) at the Gold Level.