The Discriminating Plank Buyer

Words: Dan Kamys



As a mason contractor, it’s your job to be not only an informed buyer, but also a defensive buyer. This rings true for every piece of equipment on your jobsite, including planks. Masonry sat down with John Warlikowski, western sales manager and LVL product manager for Kennison Forest Products Inc., and Dean Cook, vice president of Indian Mill Corp., to learn what to look for in a quality plank, and what could happen if you neglect to be a discriminating plank buyer.

Masonry Magazine: How has your company managed to survive in such a down economy?

John Warlikowski ??Dean Cook

John Warlikowski: By providing excellent products and service.

Dean Cook: We have continued to hold to our principals of doing business by providing, excellent product, competitive pricing and timely service. Most companies who sell scaffold plank are brokers, not a mill. Since we are a mill, we are doing more direct advertising and sales to the consumers.

Masonry: What’s the biggest concern in the industry when it comes to scaffold planking?

Warlikowski: The biggest concern is still the same thing that it has been for many years: buyer beware. Are you buying certified scaffold planks? That is why we suggest contractors ask the following questions from those who are attempting to supply them.

Cook: Our biggest concern with scaffold plank in a down economy is that users will not buy a quality product, and workers will be needlessly injured.

Masonry: What are the possible repercussions that mason contractors might incur if they use uncertified scaffold planking?

Warlikowski: The worst, of course, is the would-be death of a worker. Second, the financial loss is immeasurable.

Cook: First are accidents; second is the loss of revenue, not just the contractor but their families, OSHA fines, litigation, higher insurance costs, and, eventually, bankruptcy. Many people don’t understand the trickle-down effect one little accident has.

Masonry: Do you feel that uncertified lumber will not last as long as the certified types of scaffold planking?

Warlikowski: It will not last as long as certified planks. The requirements for Solid Sawn as well as Laminated (LVL) Scaffold Planks are far superior to standard solid sawn or LVL.

Cook: Definitely. The lumber purchased from most box stores or lumber yards is four to five grades below the grade needed for scaffold planking. Scaffold Plank gets its strength from the mandatory density and grain of the wood. The lower the grade of the wood, the less density and grain it may have; the greater the absorption of moisture and chemicals; and the faster the rate of decomposition.

Masonry: What can mason contractors do to help fight problems with uncertified planking?

Warlikowski: Use the check list that we suggest, and know your supplier. (See sidebar.)

Cook: Research your vendors. Get online and lookup trade associations such as Scaffold Industry Association (SIA), MCAA, Timber Products (TP), Southern Pine Inspection Bureau (SPIB), and West Coast Lumber Inspection Bureau (WCLB).?? Every true, solid sawn scaffold plank comes with five mandatory markings on its stamp: third-party agency, mill name or number, scaffold plank grade, moisture content and wood species. The consumer should be vigilant and look out for fake stamps and companies that mix in uncertified lumber with certified. Believe me, they are out there.

Masonry: Is there anything else you’d like to say to our mason contractor readers?

Warlikowski: You get what you pay for. There is a good reason why you buy the mixers and hand tools that you do. You most likely had a good experience with them in the past, and they have held up as promised, or better. Buying certified planks is like buying good tires: You want good, useable service from both.

Cook: Buying quality products the first time saves you money in the end. Look for ways of extending the life of your old plank in these tough economic times, via proper handling, storage and inspection. Coat your old and new plank with approved sealants and get longer life out of them. Remember, companies lose most of their plank while they are not being used.

John Warlikowski, western sales manager and LVL product manager for Kennison Forest Products Inc., suggests the following checklist to avoid problems with uncertified planking.

  • Each scaffold plank is capable of supporting the one-person loading requirement when the plank is supported on a 10-foot span. ANSI A10.8- 5.2.1

  • Each scaffold plank meets the OSHA capacity requirement by following provisions in paragraph 5 of ANSI A10.8 OSHA 1926.451(a) and Appendix A.1.b.i

  • Plank surfaces (top and bottom) are not obscured by any coating or finish. Finishes or treatments are allowed if they are not opaque. ANSI A10.8- 5.2.12 and OSHA 1926.451(b)(9)

  • The plank is manufactured under a quality management system (i.e. ISO 9001)

  • The manufacturing process is inspected on a monthlybasis by an independent third-party agency (i.e.??TP. APA, PPA)?? ANSI A10.8

  • All adhesives used in the manufacture of the planks meet the requirements of ASTM D2559.

  • Information on planks is embossed on the sides for means of long-term identification.

  • All planks are embossed with the MOE on the sides for means of long-term identification. (i.e. 2.15E, 1.9E)

  • All planks bear the seal of an independent, nationally recognized third-party inspection agency. ANSI A10.8-5.2.10

  • Plank emboss includes a means of identifying the manufacturer (i.e. manufacturer name/logo or product brand name) an identification of the manufacturing mill number.

  • Date of manufacture is included on the plank for traceability to manufacturing data.

  • The planks is clearly identified that it is intended to be used as “SCAFFOLD PLANK”

  • All chemically treated (i.e. fire-retardant) planks are readily identified as such. Identification should indicate that chemically treated planks are safe for either interior or exterior use.

  • Allowable design properties are published by the manufacturer. ANSI A10.8-5.2.9

  • Design values include appropriate adjustments such as wet use and fire-treatment.

  • Tables indicating maximum span are published by the manufacturer consistent with industry-accepted criteria. ANSI A10.8-5.2.11

  • Planks are designed so that they do not deflect more than 1/60 of the span when loaded. OSHA 1926.451 (f)(16)

  • Product name embossed on plank matches name on literature.

  • Literature includes manufacturer recommendations on the following:

?????? ?????? –?????? Proper storage and handling –?????? Visual inspection –?????? Mechanical evaluation.

  • The manufacturer can supply a certificate of insurance.

  • The manufacturer offers a warranty covering the quality of the manufactured of the product.

  • The manufacturer is an active member in the Scaffold Industry Association and other industry trade and professional associations.

  • The manufacture has personnel and ability to respond to technical questions and field problems.

Masonry Safety Inspections

The look of confusion and utter loss on people’s faces when I tell them that I’m a safety inspector for a masonry company is often hilarious.

About: Safety
Dave Jollay Announced as Third Inductee for MCAA 2024 Hall of Fame

Following in the footsteps of his father, O.L. Jollay, the founder of Jollay Masonry, Inc., Dave Jollay has carved out a remarkable career in the masonry industry.

What AI Can Do For the Masonry Industry

If your pension fund doesn’t hold NVIDIA stock, your fund manager has some questions to answer. This week, NVIDIA became the most valuable company in the world, with a market cap exceeding $3.4 trillion. They have been at the forefront of AI mania that ha

About: Featured
Brick: A Resilient Product That Will Make You Proud

Originating as the very dirt beneath our feet, brick has proven to be a sustainable, enduring solution that has been trusted for hundreds of years. While modern consumerism tends to focus on providing fast, cheap merchandise that is not intended to last,