The Cutting Edge

Words: Dan KamysFebruary 2009 Saw Blades The Cutting Edge
?????? Information about the Masonry Industry
Diamond Vantage - Blizzard Blade
New all-purpose diamond blades are designed to cut almost anything, so masonry contractors don't have to waste time changing blades or risk damaging them if they cut the wrong materials. Once these new blades are in the saws, contractors never have to worry about matching the blade to the material again.

"Sometimes, when a mason starts to cut, the blade is too hard for the material he has," says John Siva, director of research and development for Olathe, Kan.-based Husqvarna Construction Products North America. "We give them a blade that can almost guarantee they will be able to cut a range of masonry materials."

Other new diamond blades offer increased performance at higher speeds, faster cuts, and longer blade life.

One blade, many materials A one-size-fits-all approach to diamond blades is becoming more commonplace and more practical, since the blades are able to cut almost anything masonry contractors encounter on the jobsite.

Dan Steiner, president of DITEQ Diamond Tools and Equipment in Lee's Summit, Mo., calls his new ARIX C44 blade "the Swiss Army knife of diamond blades" because of its ability to cut most materials.

"This is one blade that can do everything," he says. "All you need now is one blade. It allows you to cut a variety of products. It's a do-all blade that will cut a ton of stuff."

The blade uses the company's ARIX technology, which precisely arranges diamonds throughout each segment for maximum performance. Steiner says ARIX blades cut 50 percent faster and last 30 percent longer.

"Some customers are getting twice the life out of the [C44] blades," he says. "Guys are seeing the results and see it's making them a lot of money."

C44 blades offer undercut protection, so they can quickly cut brick, block, pavers, and other materials during the entire life of the blade.

"We put undercut protection that protects the core from premature undercutting," Steiner explains.

Husqvarna's new MI5 and MI8 diamond blades also cut a range of materials.

"The blades work great on hard, abrasive materials," Siva says. "You can cut a broad range of applications."

Information about the Masonry Industry Diteq - ARIX C44 Blade Better performance at higher speeds Typically, when blades operate at high RPMs, the blade slightly elongates, affecting the cut, Siva says. Husqvarna eliminated the "tension problem" on its MI5 and MI8 blades, offering accuracy at increased speeds.

"At a higher RPM, the centrifugal force causes the blade to increase in diameter by a fraction of a hair. When that happens, the blade starts to wobble," he explains. "As soon as you hit the material, you see the blade go left. It walks all over. We call that a tension problem."

A wobbly blade makes a wider cut and can be dangerous to the saw operator, Siva says. "The wobbling can be so bad that I've seen the blade hit the blade guard. It can be especially bad with a dry blade."

Zenesis blades from Diamond Vantage Inc. in Grandview, Mo., utilize new technology to offer faster cut speeds, says Jeff Shermo, regional sales manager. The blades also offer longer life spans.

Standard blades have randomly placed diamonds, so some segments end up with lots of diamonds, while others have hardly any, Shermo says. That blade manufacturing process is like mixing chocolate chip cookies: Some cookies have more chips than others. Diamond Vantage's "diamond patterned technology" eliminates that randomness by placing each diamond in a specific location for optimum performance, ensuring that the diamonds are fully used before falling out of the segment.

"You have a better placement of the diamond in the blade. It allows for a lot faster cutting and better performance," Shermo says. "This pattern technology is the future of diamond blades."

Information about the Masonry Industry Diamond Vantage - Zenesis Blade Cooler blade for aggressive cuts Manufacturers are also designing diamond blades that offer more aggressive cuts, allowing masonry contractors to cut a range of materials quickly. The Blizzard, a new high-speed blade from Diamond Vantage, cuts faster than traditional blades, and it runs up to 30 percent cooler for efficiently cutting hard materials, including brick and pavers, Shermo says.

A notched segment gives the blade a quicker bite into the cut, which increases the cutting speed, he says. Strategically placed slots in the blade core cause heat to wick away, lowering the cutting temperature.

"The notched segment makes it cut more aggressively," Shermo says. "The notches keep the blade cooler when cutting hard material."

By having a cooler, faster cutting blade, the saw operator won't try to compensate for a slower cut by pushing harder on the saw, which isn't good for the blade, he says.

New blades will continue to hit the market in 2009. This year, DITEQ plans to unveil a fast-cutting masonry blade that's on par with premium blades, but it'll be offered at a mid-range price.

"They'll get a really good blade that's at a less expensive price than a premium blade," Steiner says.

Power Saw Safety

Each year in American workplaces, powered portable and stationary mechanical saws are responsible for thousands of injuries serious enough to require medical attention. Most of these injuries occur because the saw operator is not adequately trained, or the saw blade is insufficiently protected. Using properly guarded blades and appropriate protective equipment, such as safety goggles, will greatly reduce the risk of safety and health hazards when working with saws.

OSHA offers the following safety tips:

  • Keep hands and other body parts away from the line along which the saw will cut
  • When using a table saw, always guard the portion of the blade below the table
  • Keep saw blades in good condition to prevent the saw from throwing debris
  • Always guard the saw's power transmission apparatus.

Four Different Types of Natural Stone Used For Masonry

Natural stone has been a staple in masonry for centuries. Before it was used to transform home and landscape designs on residential properties, it was used for historical buildings and some of the most iconic destinations in the world.

Advice to the Beginners

The best advice I could give anyone that is starting a career in masonry is that first and foremost, you must "know" yourself. What do you like to do? What would you like in a working environment? Do you like to be outside? Do you enjoy physical activity

About: Featured
Masonry Safety Inspections

The look of confusion and utter loss on people’s faces when I tell them that I’m a safety inspector for a masonry company is often hilarious.

About: Safety
Dave Jollay Announced as Third Inductee for MCAA 2024 Hall of Fame

Following in the footsteps of his father, O.L. Jollay, the founder of Jollay Masonry, Inc., Dave Jollay has carved out a remarkable career in the masonry industry.