The Science of Custom Mortar Mixes

Words: Jeff Leonard
/Public/News/662006906-1.jpg" width="250" height="167" border="0" alt="A dry water repellant admixture is added to batch before being packaged in 3000-lb. bulk bags">
A dry water repellant admixture is added to batch before being packaged in 3000-lb. bulk bags

Some masonry jobs require specific mixes for the project at hand. For instance, many restoration projects are managed by local historical societies that require the mortar to be mixed using the same formula as the original construction, matching the specifications exactly.

In other cases, the project architect or engineer, for reasons of performance or bond, may specify mortar additives, such as water repellants, pigments, lime replacements, latex modifiers, accelerators (cold weather) or retarders. The specified additive or pigment can sometimes prove too difficult or impractical to add in the field because of its small dose in relation to the batch size.

When field mixing using a conventional mixer, pigments can sometimes prove to be a challenge for other reasons as well. Aside from measuring the pigment accurately, moisture content in the sand pile varies from dry to wet conditions. Typically, the laborer in charge of mixing will add the same number of shovels full of sand to a batch and adjust as "instructed" by the foreperson or masons on the wall. Inherently, there is usually less moisture at the top of the sand pile than at the bottom. Many color pigments are temperamental to the varying sand dosages - deep reds and darker colors generally require more care in the sand/cement/water ratio to ensure consistent color.

/Public/News/662006906-2.jpg" width="250" height="167" border="0" alt="Blended mortars in 3000-lb. bulk bags">
Blended mortars in 3000-lb. bulk bags

For such instances, creating a custom mortar mix can often be a practical solution.

When completed as a custom blend, finished mixes can be supplied in any size, but are typically packaged in small (80 lbs. or less) and bulk (3,000 lbs.) packaging. When using the bulk package, as supplied for commercial and large residential contractors, a silo system can be used, dispensing dry product into a standard mortar or concrete mixer.

Case Study: Matching Mortar
Tony Fox, president of Masonry Specialists of Union Grove, Wis., was awarded a job on the Milwaukee County Botanical Gardens in Greendale, Wis., which required a latex additive to increase bond and eliminate the penetration of water. The project was the New Visitors Center and Café for Milwaukee County. The face of the building consisted of large fieldstones that were mostly encased in mortar, with only about a third of each fieldstone exposed.

/Public/News/662006906-3.jpg" width="250" height="167" border="0" alt="Quickset Panel employee pours mortar slurry onto pre-assembled panel">
Quickset Panel employee pours mortar slurry onto pre-assembled panel

In addition to a latex additive, the mortar had to match existing structures on the grounds that were built in the early 1900s. To obtain the perfect match, many parts of the existing structures had to be appraised and analyzed in a lab. It was ascertained that, to obtain a match, the mortar also needed a pigment. Furthermore, matching the texture of the original mortar increased the complexity of the mixture. Ultimately, the job required a combination of 3/8-inch pea stone, course and fine sand, pigment and the latex additive within the mortar.

"That would have been pretty hard to do in the field and get every batch right," Fox said. "We also had to strike the joints with a bucket trowel to match the original building."

"One man was able to do 80 to 120 square feet a day with this fieldstone - I can't imagine having to measure all the different materials that ended up in that mortar," he added.

Case Study: The Right Amounts

/Public/News/662006906-4.jpg" width="250" height="167" border="0" alt="Employee screeds mortar into joints of pre-assembled panel">
Employee screeds mortar into joints of pre-assembled panel

Scott Bundy, owner and president of Quick Set Panels located in New Berlin, Wis., was another customer who had a need for a custom blend.

Quick Set Panels had their own concoction of mortar used in the production of pre-assembled Pittsburgh Corning glass block panels made for installations in residential and commercial work. The mortar, designed by Bundy, was a blend that had a rapid initial set that allowed for a more efficient process in the plant when assembling glass block panels.

"After obtaining field measurements, or measurements from plans, we pre-fab the [glass bock] panels in our shop. Our process, set up in an assembly line format, cuts down on field time in the installation process," Bundy said.

Quick Set Panel employees typically measured the components by volume; however, one employee's idea of a half pail of this and a quarter pail of that varied slightly.

/Public/News/662006906-5.jpg" width="250" height="167" border="0" alt="Finished pre-fab panel">
Finished pre-fab panel

"The problem with mixing the way we were is that you didn't really know if the mix was bad until you started using the material on the panels," Bundy said. "If something wasn't right, we had to disassemble [the panels], clean them, and mix another batch.

"Also, some of the components were not readily available locally and had to be obtained through distribution," he added. "To get a good price on a few of these components, it was necessary to buy in pallet quantities. Certain products last quite a long time."

One of the components, specialized Fondue Cement, used as an accelerant, was not readily available. "To get this particular grade of Fondue, it was necessary for us to arrange for a pickup in Indiana. I also had to buy in bulk quantities and the product had a shelf life. Also, buying some of these raw materials in pallet quantities was not something I liked to do because it was an inventory headache."

The next time a job requires mortar additives, consult with a vendor to see if a custom-mixed mortar mix might be right for you.

Masonry Equipment Safety: Meeting New OSHA Standards with Smart Solutions
July 2025

Masonry work, involving cutting, grinding, drilling, and laying stone, brick, or concrete blocks, presents numerous safety hazards—many of which stem from improper equipment use or poor jobsite practices. With evolving Occupational Safety and Health Admin

The STABILA Force Driven by Operations
July 2025

Leadership In today's competitive business landscape, maintaining an efficient, well-organized warehouse is essential for meeting customer demands and ensuring smooth operations. By implementing effective processes and best practices, businesses can achi

MASONRY STRONG Podcast, Episode 24 Recap: Gary Hensley, VP of Sales at Oldcastle Adams
July 2025

On this episode of the MASONRY STRONG Podcast, Gary Hensley joins Justin in Indianapolis to talk about his story within the masonry industry, how he got started, how he's seen it evolve, and where he sees it going. Why the Masonry Industry? Concrete and

The Enduring Power of Structural Masonry
July 2025

Masonry has been holding its ground for millennia — literally. And thanks to the simple brilliance of arching action, it continues to do so with strength, style, and surprising efficiency. In an era of advanced modeling and fast-moving schedules, one time