Masonry Magazine March 1970 Page. 44
PRODUCT
New Clipper Briksaws
Two new Compact Briksaw masonry saws have been developed by Norton Company's Construction Products Division, formerly identified as Clipper Manufacturing Co. They are designed for smaller masonry sawing jobs and as standby saws on larger masonry construction projects.
Weighing only 129 lbs. and compact enough (29" high, 34" long, and 19½" wide) to fit into a car trunk or station wagon, the Clipper Briksaws are especially well-suited for repair crews. They can be operated from the tailgate of a station wagon or pickup truck or on a material pile or scaffold. Principal advantages claimed for these new saws, which are available in 1½ h.p. (Model CB-152) and 2 h.p. (Model CB-202), are portability; inboard-mounted height notches; and a submersible electric water pump which can be dunked in a barrel of clean water to extend blade life when cutting very abrasive materials.
For additional information contact your nearest Clipper dealer or Norton Company, Construction Products Division, P. O. Box 9604, Kansas City, Mo. 64134.
Pre-mix Colored Grout
A new pre-mixed colored dri-grout, available in 13 basic colors including white, has been introduced to the market by Premier Products Corporation, a Kansas City, Missouri producer of cement based products.
"Our pre-mixed colored grout makes it easier for the contractor to work with color," Mr. Robert Crump, president of Premier, said, "because adding color to dri-grout under factory-controlled conditions not only saves him an extra mixing step on the job, but also assures him of uniform, consistent color from day to day, from job to job."
Premier Products, formerly Premier Stucco Company, has been a pioneer in the use of color in cement based products and also markets pre-mixed colored pointing grout and colored mortar for masonry contractors.
Premier Products Corporation has over 38 years experience producing cement based products and currently markets a wide line of products for tile, masonry, cement and plaster contractors, including THIN SET cement, Bondtite PAINT, Premier Stucco, Perma-Rock MATRIX.
Information on how to obtain the free display is available from Premier Products Corporation, 4144 Pennsylvania Avenue, Kansas City, Missouri 64111.
Nukem Tile Floors
Specialized materials and methods for construction of long-lasting, sanitary and economical quarry tile floors are described in a new brochure. Engineered to meet specific heat, wear and chemical resistance requirements, Nukem quarry tile floors may be constructed with a choice of time-proved materials: furans, epoxies even a specially-formulated, time-saving water-washable grout material, if desired.
For information write J. R. Shean, Amercoal Corp., Brea, Calif. 92621, requesting "Quarry Tile Brochure."
Aeroil Trash Chute
Aeroil Products Company has announced the availability of their 30" Trash Chute.
The Trash Chute is available in 4 ft. sections complete with self-locking chains that support the chutes.
The chutes are primarily designed for contractors that have to get rid of debris on construction sites and they are also used by demolition crews for dumping directly into trucks that haul the trash away.
Further Free information is available by writing to: Aeroil Products Company, Inc., 69 Wesley Street, South Hackensack, N.J. 07606.
Goldblatt Tool Catalog
A new 64-page, full color catalog of Trowel Trades Tools published by the Goldblatt Tool Co., Kansas City, Kan., is a how-to-do-it manual for building men as well as the most complete reference volume for both traditional and new tools for the trowel tradesman. Known informally as the "encyclopedia of the trowel trades", Goldblatt's newest catalog illustrates and describes over 1,200 tools for builders. In addition, it is crammed with useful information on the six primary trades the tools are used for: brick, block, and stone masonry, cement finishing, plastering, dry wall hanging and finishing, lathing and tile setting.
For a copy of the new 1970 Goldblatt Tool Catalog write to Goldblatt Tool Co., a subsidiary of Bliss & Laughlin Industries, 511 Osage, Kansas City, Kan. 66110.
Oury Engineering Booklet
Oury Engineering Co., Marion, Ohio, a division of Harsco Corporation, has just published a new 8-page brochure dealing with its line of "Jumbo"® and Twin Materials Hoists.
The detailed brochure illustrates and describes the capabilities and capacities of the hoists and features photographs of the products in use. Complete specifications on the Jumbo Hoists are included.
As stated in the brochure, the Oury Hoists "are engineered for the safe, profitable operations of general contractors, masonry contractors and many others to whom economical, efficient hoisting is important."