Masonry Magazine March 1970 Page. 45
PRODUCT
Stone Mortar Mixers
Stone Construction Equipment, Inc. has been awarded several U.S. Defense Dept. contracts for its 67PM Mortar Mixers. Before being approved for Defense Dept. use, the Stone mixers underwent extensive inspection and testing programs in which they met or exceeded Government standards. Other products manufactured by Stone include concrete mixers, stompers, tampers, compactors, power screeds, and portable heaters. Information on any of the above items is available from Stone Construction Equipment, Inc., Honeoye, N.Y. 14471.
Hauck Ladder Hoist
Hauck Construction Products Corp. announces the introduction of their all new 400 lb. Ladder Hoist for masonry and general contractors. The standard unit is 26' high but can be used up to 39' by addition of a 13' section. The Hoist is available with a choice of electric or gas engine power packs. Full information, describing this new Hoist, is available by writing to Hauck Construction Products Corp., 17 Georgia Street, Teterboro, New Jersey, 07608, and ask for Hoist Catalog #HC-101
Ace Corrosion Remover
At last, a way to easily remove rust from iron and steel, remove corrosion from chrome and aluminum and remove tarnish from copper, brass and bronze. No more scraping, wirebrushing or sand-blasting. To use this amazing new product, you simply brush Rust-Removo onto any rusty surface. It is a jell that sticks to anything, even vertical surfaces and ceilings. This unique blend of mineral acids, special solvents and wetting agents then goes to work on the rust. Let it stand awhile and then flush it off with water and the rust is gone! And what's more, after washing rust away with water, this sensational new chemical leaves a protective coating to help retard further rust. And if the surface is to be painted, this same coating makes paint adhere better. Truly a miracle product, Rust-Removo is safe to use, contains no muriatic acid, is non-fuming, non-flammable. For information see your supply jobber or write to Ace Chemical Co., 4401 Ravenswood Ave., Chicago, Illinois 60640.
Weld-Concrete Bonding Agent
Two-page brochure describes use of a liquid, resinous bonding agent, Weld-Crete, for repairing, correcting and finishing concrete. Unique re-emulsifying action permanently bonds new concrete, stucco and terrazzo direct to any structurally sound surface, such as concrete, brick, masonite, gypsum board, metal, ceramic tile, glass, etc. Scarifying or special surface preparation is unnecessary. Weld-Crete is non-toxic, non-flammable, and is easily applied using spray, brush or roller. Its use as an additive for thin toppings and featheredging is also discussed. Complete performance data is contained in accompanying Spec-Data sheet, from Larsen Products Corporation, Rockville, Maryland 20852.
Hydraulic Conveyor
Aeroil Products Co., Inc. has announced the introduction of their all new 60 ft. Hydraulic Conveyor for the construction industry. This unit comes complete with outriggers for added stability when the conveyor is elevated to its maximum height. The 60 ft. Conveyor was expressly designed for pouring concrete, carrying sand and gravel, brick and block and it is also a radial stacking conveyor. Free specs and literature are available from: Aeroil Products Company, Inc. 71 Wesley Street, South Hackensack, N. J. 07606
Portable Drafting Machine
Now available again from the Drafting Equipment & Supply Company is the original portable drafting machine, particularly suitable for students, field engineers, for use in the home, as well as meeting most requirements for in-office service. The machine features anodized aluminum protractor and bevelled edge scales, and is supplied complete with board. The machine is offered in two sizes, 10-½" x 2" to accommodate 8-15 x 11 sheets, and 15 x 20 to accommodate 12 x 18 sheets. The smaller machine features a mechanical scale; the larger one offers a choice of interchangeable architectural and engineering scales. Each machine is available for immediate shipment on a mail order basis. Price for the smaller machine is $17.50, and $23.50 for the larger machine, both of which are shipped postage-paid to all 50 United States and to Canada. For additional information, please contact Drafting Equipment & Supply Co., Box 8343, Canton, Ohio 44709.
White Roc Sealer Guide
A new specification and procedure guide describing White Roc M650, a clear, acrylic concrete and masonry sealer, providing effective and durable protection against moisture penetration and surface staining caused by air pollution, soot, smoke, dirt, etc., has been announced by Coatings and Adhesives Corp., 1912 Lehigh Rd., Glenview, III. 60025. Especially useful in the protection of the more expensive decorative concrete surfaces, White Roc M650 imparts no discoloration or stain of its own, and is compatible with paints and other sealers. The coating leaves an exceptionally durable invisible film which is acid resistant, yet capable of "breathing." It may be applied by brush, roller, or spray. The product is packaged in 55 gallon drums, 5 gallon pails, and 1 gallon cans. Coatings and Adhesives Corp., provides laboratory testing service for any problem surfaces!
Bosch Hammer Drill
A new, two-speed Super Duty Hammer Drill weighing less than 5 lbs. but with concrete capacity of 4" has been added to the line of Bosch industrial power tools. The new tool (Model 1173) is considered ideal for anchor setting and diversified work in industry, including plumbing and electrical construction, furniture manufacturing, and interior decorating, and general maintenance work. Standard accessories include a carrying case, depth gauge, and side handle. Suggested list price is $98.50. Details are available from the Broadview, III., headquarters of Robert Bosch Corp., 2800 S. 25th Ave. Broadview, III., or branch offices at 111 Crossways Park, West Woodbury, L.I., N.Y., and 147 Beacon St., South San Francisco, Calif.