Masonry Magazine November 2010 Page. 35
Advertisement
If You Ever Find An "Or Equal," Far More Let Us Know. Moisture Control Than Usual.*
1 5-1/2 ft. Panels of PRE-CUT FLEXIBLE FLASHING
All main components are factory-assembled onto easy-to-mount flashing panels. Pre-Formed Corner Boots, Stainless Steel Corners & End Dams are available. Patented Product TOTALFLASH CAVITY-WALL DRAINAGE SYSTEM
2 Built-In NO-CLOG DRAINAGE MATTE
7 Built-In NO-CLOG WEEP TABS
Uses 40-mil polymeric, reinforced, UV stable flashing membrane, incorporating DuPont's Elvaloy" KEE polymer.
3 Built-In TERMINATION BARS
6 Built-In STAINLESS STEEL DRIP EDGE
All Screws & Adhesive Tubes are included in each box of TOTALFLASH™
4 Built-In EDGE DAM
5 Clearly Specified LAP JOINTS
*Half (Or Less) Your Usual Time & Labor Costs.
• Every moisture control element built into each light-weight, easy-to-use panel.
• Everything arrives in one order. Just open the carton and start installing!
Available in sizes for new construction, restoration, renovation, or remediation. SPECIFY Mortar Net® with Insect Barrier
AFTER 15 YEARS, MORTAR NET GETS A NEW FACE! INTRODUCING MORTAR NET WITH INSECT BARRIER!
New Mortar Net with Insect Barrier lets water out without letting bugs in. Insects can enter through weep holes and nest in the wall cavities. While our popular Weep Vents guard weep holes against blockage by many types of insects or debris, now Mortar Net With Insect Barrier adds another layer of defense inside the wall-cavity!
Otherwise, it's the same Mortar Net product you've used for years. It gives you the same dependable moisture-control...the same mortar-capturing "dovetail" design...the same quick & easy installation. Except now, one side is covered with a special fabric that still lets water OUT and lets air IN...but ALSO creates a barrier against insect-infestations.
800-664-6638 www.MortarNet.com
Blok-Flash delivers the surest, most cost effective control of moisture and mold-growth in exterior single-wythe CMU wall systems. It provides 10 times greater bond at the exterior bed joint than a membrane through-wall system, with no water penetration, no by-pass, and rapid expulsion of moisture.
Blok-Flash is a tough, lightweight, embeddable flashing system, suitable for use at all flashing/weep vent locations, including base of wall, above door and window openings, above bond beams, in parapet walls, and wherever flashing is necessary.
When moisture infiltrates the wall and flows down the vertical cores, Blok-Flash intercepts it and diverts it to the exterior, quickly and effectively.
800-664-6638 www.MortarNet.com
Mortar Net USA LTD.
ARCAT
Sweets
800-664-6638 MortarNet.com
READER SERVICE #138