St. Louis Masonry Center Renovation

Words: Marty Hodgson
/Public/News/20100622080000-1.jpg" width="530" height="298" border="0" alt="Shown is the newly expanded and renovated Masonry Center in St. Louis, home to the Mason Contractors Association of St. Louis and the Masonry Institute of St. Louis.">
Shown is the newly expanded and renovated Masonry Center in St. Louis, home to the Mason Contractors Association of St. Louis and the Masonry Institute of St. Louis.

With the nation’s financial markets on the verge of collapse, panic and fear were sweeping the nation in the fall of 2008. St. Louis’s construction industry was especially hard hit. Numerous projects were postponed, and the industry began hemorrhaging jobs.

These were the bleak conditions confronting the leadership of the St. Louis Mason Contractors Association as they wrestled with a decision on their pending plans for the major expansion and renovation of the Masonry Center, their Richmond Heights headquarters at 1429 S. Big Bend.

The ongoing background turmoil complicated their decision. No one questioned that the 1950s-era structure had to be replaced. Not only was it too small, but also it hadn’t been upgraded in 25 years and could no longer serve the needs of the MCA and its sister organization, the Masonry Institute of St. Louis, also located in the building.

But with the local construction industry spiraling downward, the MCA’s officers knew they couldn’t play it safe and put the project on the shelf. Too much was at stake. “We felt we owed it to the St. Louis masonry industry to go ahead with our plans and provide jobs,” says Richard F. Frisch Jr., president of the MCA and owner of Frisch Masonry in Kirkwood.

“It would have been easy to put the project on hold and wait until things got better,” says Jeffrey D. Schmidt, MCA VP and owner of JDS Masonry in St. Charles. “Instead, we decided to show our commitment to the industry and its future by putting people to work.”

The $2.1-million project, which was completed in October, effectively doubles the building’s size while modernizing its facilities. The expansion, designed by local architects at Archimages, features a meeting/presentation room that can seat up to 200 or be divided into two rooms that can accommodate 90 persons each. The expansion also includes additional office space, a larger boardroom, a larger library/study room, and modern restrooms.

“I think the real story is that when the economy was at its darkest and everyone was afraid we might be looking at Armageddon, the board decided to go ahead with the project,” concluded David A. Gillick, MCA executive director. “The MCA has been at the heart of the St. Louis masonry industry since we were chartered in 1896. Going forward with the project and the jobs it provides is our way of showing that we remain committed to the industry and its future success.”
The Mason’s Mark: Defining the Craft Through the Trowel
May 2026

Walk onto any job site, from a custom residential chimney to a sprawling commercial block wall, and you will hear it before you see it: the distinctive ring of high-carbon steel striking masonry. The trowel is more than just a mortar scoop; it is the cond

Registration Now Open for the 2026 MCAA Midyear Meeting in San Antonio, Texas
May 2026

The Mason Contractors Association of America (MCAA) is thrilled to announce that registration is now open for the highly anticipated 2026 MCAA Midyear Meeting, set to take place in San Antonio, Texas. This exciting event is scheduled from September 13th-1

Case Study: The Revere Condominiums at River Oaks
May 2026

The Revere is a boutique condominium located in the River Oaks area of Houston. The nine-story development offers 33 residences with refined amenities for those looking for luxury living near the downtown area.

URGENT: Only One Cornerstone Spot Remains in the 2026 Masonry Alliance Program
May 2026

The Mason Contractors Association of America (MCAA) is thrilled to announce that the 2026 Masonry Alliance Program (MAP) has reached a critical stage of exclusivity.