Advantages of safe, clean and efficient wood heat

Words: Precision masonry Inc.Residential wood-burning appliances need to be safe, clean and efficient, but also should be healthy. Masonry heaters, by the way they are designed, provide heat that is safe and healthy, and save money compared to other wood-burning devices.

Masonry heaters are designed to burn fuel at its maximum efficiency. To properly burn wood, you need a flame temperature above 1,100 degrees Fahrenheit, a liberal air supply, and a good, dry fuel source such as split cordwood. Combustion temperatures this high burn up creosote in the firebox, preventing any buildup on flue walls. The heat produced by these high temperatures is stored in the masonry mass, and then gently and evenly released into a residence, business or office as radiant heat. A properly designed masonry heater can warm your home on one or two fires a day, eliminating the need for constant stoking.

Think of a masonry heater as a large warm rock in a home. It is a high-mass heat storage system. Short, hot fires generate tremendous amounts of heat, which is then stored in the masonry, to be slowly and evenly released into your home.

Masonry heaters are true radiant heating systems, and there is very little temperature stratification in the home. Since radiant heat warms objects directly, you feel warmer over a wider range of air temperature. It’s like experiencing a sunny day and that feeling of well-being that your body intuitively recognizes.

The design and size of the heater must be matched to our climate and your home’s heating requirements. Since the heat retention and output of the masonry heater are predictable, your heater builder can design a system that fits the homeowner’s needs.
Building Stonework That Lasts Beyond the Surface
April 2026

How Today’s Systems Strengthen Traditional Masonry In masonry, longevity has always been the true measure of craftsmanship. Any wall can look impressive the day it’s finished, but the real test comes years later, after the first freeze-thaw cycle, after t

Rob McKay
Technical Talks
Read More
Mastering The Art Of Masonry Repair: The Dos and Don’ts
April 2026

Whether we specialize in repairs and restoration work or new construction, repairs are something that we all must do, at least from time to time. With ever-increasing competition from faster and cheaper building systems, the onus is on us as masonry profe

John Bard
Technical Talks
Read More
The Evolution of Brick Staining: From Color Complaints to Industry Essential
April 2026

Over thirty years ago, much of the conversation around brick staining centered on color complaints. In the early days, nearly all of our work stemmed from those situations, projects where something had gone wrong, and staining was brought in as a correcti

Don Foster
MAP Partner
Read More
Is Contact with Wet Mortar or Grout Dangerous?
April 2026

In the world of masonry, few materials are as common as mortar and grout. Whether you are laying brick, concrete masonry units (CMU), or pouring grout into masonry walls, wet cement and mortar are constant companions. However, beneath their utility lies a

Zach Everett
Technical Talks
Read More