Masonry Magazine February 2009 Page. 32

Masonry Magazine February 2009 Page. 32

Masonry Magazine February 2009 Page. 32
MAST CLIMBERS

Photo courtesy of EZ Scaffold

"Instead of one laborer per mason, you can have two laborers per three masons," he says.

Mast climbers let masons work between waist and chest level, where they can lay 25 percent more product because of better ergonomics. "They're working at their ideal height and not stressing their bodies," Solomon says, who points out that raising mast climbers requires less work than other scaffolding.

RAM SNAP

Your clean outs are covered with RamSnaps
* No nails or screws to remove or patch
* No cracked/broken CMU's
* Tested to 28 Ft.
* Save Time AND Money
* Cover Large Holes
* Works with Smart Masonry System window
* Won't rust

Contact Tim at RamSnap Pro 888-572-6762 www.RamSnapPro.com
See us of World of Concrete Booth N774 Demo DVD/Samples available. Just Say NO to Nails!

RAM SNAP CIRCLE 209 ON READER SERVICE CARD

IPAF PRESENTS MASTCLIMBER SAFETY TO OSHA

Kevin O'Shea, chairman of IPAF's (International Powered Access Federation) International Mast Climbing Work Platform (MCWP) Committee, presented mastclimber safety before OSHA's Advisory Committee on Construction Safety and Health in early-December 2008. O'Shea was invited to speak in response to OSHA's desire to see a move toward industry best practice and regulation following a series of accidents involving mainly MCWPs and cranes.

During his presentation, O'Shea, who works with Mastclimbers LLC in Atlanta, discussed the U.S. market size for MCWPs, the purpose of the IPAF, and the programs offered by IPAF to increase safety awareness and worksite performance.

Among the facts and figures O'Shea presented about the industry:
* An average of 12,600 people use MCWPs each day
* More than 2.5 million working hours are put into the erection and dismantling of MCWPs each year
* There are about seven or eight near misses on MCWPs each working day in the United States
* About 4,200 units operate each day in the United States.

O'Shea also raised some areas of concern based on worksite observations:
* Insubstantial planking on the front edge of the platform causing either a trip or fall hazard
* Inadequate anchor installation and testing
* Anchors over- or under-tightened
* Ties temporarily removed and inadequately re-instated during use
* Inadequately trained and assessed installers
* Inadequately trained and assessed users.

O'Shea then introduced the IPAF Guidelines for the Safe Use of Mast Climbing Work Platforms: US. Edition 2008. The document was recently released by IPAF and provides comprehensive guidance and advice for MCWP users, installers, owners and rental companies. It also details the level of experience, education and skills verification required for those involved in the supply and use of the product.

Committee members were extremely interested in the PAL Card (Powered Access Licensed-Registration Card), and the level and depth of the training and assessment that IPAF requires before issuing the card. IPAF training for the use of aerial work platforms and mastclimbing work platforms is managed in the United States by its North American subsidiary. Aerial Work Platform Training, Successful trainees are awarded the PAL Card, which is valid for five years. The PAL Card is recognized in many countries and is, for example, accepted by the U.S.-based Scaffold Industry Association as proof of training.

"With crank up scaffolding, you have to have someone crank it up every seven to 10 feet on a wall," Solomon says. "With the Pro Series, one guy is able to lift 160 feet of scaffolding by himself."

Two people can erect 100 feet of Pro-Series scaffold in just a couple of hours, he says. "Now you can save labor with set up, which gets your production up because you have the guys working on the wall right away."


Preparing Masonry Jobsites for Summer Weather
April 2025

Spring is in the air, and summer is right around the corner. With that in mind, it’s time for all of us in the masonry industry to start preparing for warmer weather. It is very important that we consider the risks associated with working in the summer he

Built to Endure: Exploring the All-Weather Strength and Longevity of Manufactured Stone Veneer
April 2025

Let's talk about something we all care deeply about: the longevity of our work. You and I both know the feeling of pride when we step back and look at a finished project. We're in the business of creating structures that not only look good but also stand

Meet the Next (Fourth!) Generation at PROSOCO
April 2025

After 12 years in different roles at PROSOCO, Jake Boyer will become President of the family-owned company on June 6. Most family-owned businesses don’t make it to the second generation, let alone the third or fourth. According to recent data, only 3% of

Tips For Maintaining A Jobsite
April 2025

Jobsite Maintenance is not something that many people like to talk about. Most people want to know when the job is going to start. What is the lead time to get the material that is specified? Who is the general contractor, and are they good to deal with?