Construction Industry Safety Coalition Urges DOL to Withdraw Silica Proposal

Words: Dan KamysConstruction Industry Safety Coalition Urges DOL to Withdraw Silica Proposal

The Construction Industry Safety Coalition, which represents 25 different construction trade associations, issued the following statement as it filed comments regarding the Occupational Safety and Health Administration’s (OSHA) proposed Crystalline Silica Rulemaking:

“After an exhaustive analysis that involved hundreds of construction safety professionals, builders, construction managers and specialty trade contractors representing virtually every facet on the industry, it is our conclusion that the administration’s proposed new silica rule is significantly flawed and will do little to improve workplace health or safety. Specifically, the proposed rule sets a silica exposure standard that cannot be accurately measured or protected against with existing equipment and includes a series of data errors that undermine many of the rule’s basic assumptions.

“The proposed rule’s new silica exposure limit is virtually impossible to accurately measure or protect against using existing technology. For example, commercially-available dust collection technology is not capable by itself of protecting workers from the rule’s new silica exposure limit. A limitation the agency appears to acknowledge in its additional requirement that workers also wear respirators, something that would not be necessary if the dust collection technology was effective.

“Even more troubling, the proposal is rife with errors and inaccurate data that call into question the entire rulemaking process. Agency officials, for example, omitted 1.5 million construction workers from its assessment of the size of the affected workforce. The agency also did not consider the broad range of tasks and variety of settings and environments in which construction occurs. And the agency’s assessment of the rule’s cost was off by a factor of four.

“Given the lack of scientific explanation justifying the new exposure limits, the many contradictions between the rule and the realities faced in the construction industry, and the fact that agency officials made significant errors in the basic data the rule is based on, we are urging the administration to withdraw this proposed rule. We strongly urge agency officials to work with us and employee groups to craft a silica measure that will build upon the work all of us have done to reduce silica-related deaths by 93 percent during the past three decades.”

The CISC is made up of 25 trade associations, representing associations from all sectors of the construction industry, including commercial building, heavy industrial production, home building, road repair, specialty trade contractors and material suppliers. Workplace safety and health is a priority for all members of the coalition, and each is committed to helping create safer construction jobsites for workers.

American Road and Transportation Builders Association
American Society of Concrete Contractors
American Subcontractors Association
Associated Builders and Contractors
Associated General Contractors
Association of the Wall and Ceiling Industry
Building Stone Institute
Concrete Sawing & Drilling Association
Construction & Demolition Recycling Association
Distribution Contractors Association
Interlocking Concrete Pavement Institute
International Council of Employers of Bricklayers and Allied Craftworkers
Leading Builders of America
Marble Institute of America
Mason Contractors Association of America
Mechanical Contractors Association of America
National Association of Home Builders
National Association of the Remodeling Industry
National Demolition Association
National Electrical Contractors Association
National Roofing Contractors Association
National Utility Contractors Association
Natural Stone Council
The Association of Union Constructors
Tile Roofing Institute

For more information, contact:
Jeff Buczkiewicz, Mason Contractors Association of America
(224) 678-9709, jeffb@masoncontractors.org

Bonding with Masonry 2024: Q3

This issue’s questions come from a Mason Contractor, an Architect, and an Engineer.  What questions do you have? Send them to info@masonrymagazine.com, attention Technical Talk.   Q.  A Mason Contractor writes that they have a project to install a concret

About: Featured
How Technology Can Help Increase Efficiency Within Your Masonry Company

Masonry, a craft as old as civilization itself. From the Pyramids of Egypt to the Great Wall of China, we've been stacking bricks with a precision that would make any Lego master jealous. But let's face it, while the techniques might be ancient, the chall

Energy Efficient Shelf Angles in Modern Construction

The conversation around energy efficiency in buildings is multifaceted, requiring a holistic approach to achieve high-performance building envelopes. One often overlooked component in this discussion is the role of shelf angles used in supporting masonry

Masonry in the Media - Highclere Castle, Chatsworth House and More!

Located in Hampshire, England, Highclere Castle has gone through three iterations from its beginnings in the medieval era to today. Ownership of the estate’s land can be traced back to 749 A.D.

About: Featured