Masons: Happy Holidays From MCAA Chairman, John Smith Jr.

Words: John Smith Jr.Masons: Happy Holidays From MCAA Chairman, John Smith Jr.

We are all very busy this time of year. We all work to balance our lives all year long, but during the holidays, it is time to reflect on our families.

The MCAA staff is extremely busy this time of year as Jeff and Tim are spending a lot of time preparing for the World of Masonry in January.

We have shortened the conference by one day. We did this as a result of the survey last year. We have a lot of seminars and events during the three days. Take a look at the information, and register. We added an additional hotel in a modest price range to encourage you to bring a larger group to the convention. We offer many seminars that would help your staff and company in the next year.     

Regarding masonry around the country, most companies are reporting continuing growth. Profits are still slim, but the opportunities are growing. We continue to address manpower issues with NCCER as we have seen areas that are starting to have difficulty finding qualified craftsmen. We just hired a new staff person, Terry Ruppel, to begin our initiative to work hand-in-hand with the high schools, career centers and community colleges in the states of Kentucky and Tennessee. He will work to encourage high school programs in the trades and become their liaison and sponsor with NCCER, so they can credential their students. Credentialing their students will give them the ability to track their training and show competence on both the written and performance sides. 

We are also working heavily on the silica issue. Our coalition is busy evaluating the new rule, and I can assure you that – from what we have initially discovered of the rule – it will dramatically change the masonry jobsite and create a new burden on mason contractors with paper work and new liability exposure. 

We are hopeful that we can get changes made to the rule. The proposed PEL of .50 is not a practical or feasible limit we can meet. Our studies have shown that wet cutting can get consistently below .8 to .9. Look for more information on our website, www.masoncontractors.orb, on this issue. We need all mason contractors to work together to try to get changes made to this rule. It will make compliance with the rule extremely costly and quite complicated.      

Please enjoy your holiday, and make time to register for the convention.  

Five Truths About Final Brick Cleandown
May 2026

Not all truths are self-evident. Sometimes they’re easy to forget or clouded with misunderstanding. The good news is these truths of final cleandown are not hard to implement on your next project to ensure successfully cleaned and beautiful new brick.

Shelf Angles and Their Impact on Wall Performance
May 2026

Shelf angles have long been a standard component in masonry construction. Installed at the slab edge, they provide support for brick veneer and are often treated as a routine detail. However, as building performance requirements evolve, particularly aroun

The Mason’s Mark: Defining the Craft Through the Trowel
May 2026

Walk onto any job site, from a custom residential chimney to a sprawling commercial block wall, and you will hear it before you see it: the distinctive ring of high-carbon steel striking masonry. The trowel is more than just a mortar scoop; it is the cond

Registration Now Open for the 2026 MCAA Midyear Meeting in San Antonio, Texas
May 2026

The Mason Contractors Association of America (MCAA) is thrilled to announce that registration is now open for the highly anticipated 2026 MCAA Midyear Meeting, set to take place in San Antonio, Texas. This exciting event is scheduled from September 13th-1