Making Masonry Buildings Safer with Large Scale Seismic Tests
August 2024

A series of large-scale tests were recently concluded in the SEESL Laboratory at the University at Buffalo. The tests are part of a five-year project funded by the National Institute of Standards and Technology. The goal of the project is to improve the e

Anchor Bolt Provisions in the Masonry Code
June 2019

Anchor Bolt Provisions in the Masonry Code

Tech Talk: Veneer Anchors For New Construction
March 2019

Tech Talk: Veneer Anchors For New Construction

The Dos and Don’ts of Masonry Anchors
August 2015

I have been around masonry anchors my entire life. My grandfather started our anchor manufacturing business 92 years ago. Having been involved full-time in this business for the last 36 years, I have witnessed the creation of many extraordinary masonry b

Cintec Protects People, Property Against Earthquakes
June 2014

Seistec strengthens integrity of wall-to-wall and wall-to-floor constructions

Learning From the Masters
April 2011

Like any industry, the anchors, connectors and fasteners industries have faced trying, if not impossible, economic times during the last three years. Masonry spoke with three of this industry???s leaders to learn what it takes to survive, sus

Masonry Magazine March 2003 Page. 39
March 2003

Surveying

include layout and checking positions from the building axis, alignment along a building line, 90-degree layout from anywhere on the job site, as-built checking, checking plumb, and measuring distances.

Delano adds, "The tota

Masonry Magazine February 2003 Page. 15
February 2003

Developing a Niche in Custom Stonework

We have a crew of stonemasons who exclusively perform stonework for residential projects. The Internet is often where clients look for information on contractors who do that type of work, and we're hoping

Masonry Magazine February 2002 Page. 13
February 2002

ANCHOR REQUIREMENTS

In Seismic Design Category (SDC) C and higher, anchor frequency is increased. The 2.67 sq. ft (0.25 sq. m) of wall area per anchor is reduced to 2.0 sq. ft. (0.19 sq. m); the 3.5 sq. ft (0.33 sq. m) is reduced to 2.63 sq. ft

Masonry Magazine October 2001 Page. 42
October 2001

The NHL deal included a difficult provision: they would only agree to come to Columbus if the arena was ready for the opening of the 2000 season, which meant the arena had to be built in only two years. Normally it takes six months or longer just to obta

Masonry Magazine December 2000 Page. 42
December 2000

WIRE-BOND

We're a North Carolina-based family-owned business serving the needs of masons nationwide for over twenty-five years. Our Wire-Bond masonry reinforcement products and accessories are designed to be "mason friendly", utilizing methods

Masonry Magazine August 2000 Page. 41
August 2000

TIME TABLE
July 14-15, 2000

Buckeye Brick Swap, Wadsworth, Ohio: The International Brick Collectors Association regard bricks as part of the history of mankind. Anyone having an interest in bricks or brick history is welcome to attend. For

Masonry Magazine February 2000 Page. 16
February 2000

Chemstone Products
1612 Remuda Un, San Jose, CA 95112
Ph. 888-243-6786 Fx. 408-437-3043

ChemSystems Inc
101 10 Genard Rd, Houston, TX 77041
Ph. 800-545-9827 Fx. 713-329-9065

Cherokee Brick & Tile Co
PO Box 4567, M

Masonry Magazine June 1999 Page. 37
June 1999

WIRE-BOND

Masonry Reinforcing Corporation of America
Charlotte, North Carolina Memphis, Tennessee

Serving the masonry industry for nearly a quarter century!

We're a North Carolina-based family-owned business serving the n

Masonry Magazine April 1999 Page. 36
April 1999

MCAA Wishes to Thank the Following

Corporate sponsors for Sponsoring the MCAA Reception at Universal Studios.

Ardco Traverse Lift Manufacturers of Telescopic Material Handlers.

Hohmann & Barnard Inc. Seismic resistant product

Masonry Magazine December 1998 Page. 30
December 1998

Respirators, Engineering & Administrative Controls

Respirators, engineering & administrative controls can be effective methods of respiratory protection against silica dust. For the best protection, respirators should be selected carefully for